RING-SEALING 3S0302 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1099 Lifting Eye Assembly 2 Start By:
Remove the fuel filter housing.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the oil from the engine oil filter housing into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01113749
Remove bolts (1) and adapter (2). Remove the O-ring seal from the adapter.
Illustration 2 g01113751
Remove bolts (4) and spacers (5) from tube assembly (3).
Remove bolts (6) and plate (7).
Illustration 3 g01113831
Install Tooling (A) and a suitable lifting device on engine oil filter housing (9). The weight of engine oil filter housing (9) is approximately 95 kg (210 lb).
Remove bolts (8). Remove engine oil filter housing (9).
Attach a suitable lifting device on oil filter housing support (11). The weight of oil filter housing support (11) is approximately 71 kg (157 lb).
Remove bolts (10). Remove oil filter housing support (11). Installation Procedure
Install engine oil filter housing (9) in the reverse order of removal.