RING-SEAL 4794733 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0808 Multipurpose Grease 1
Illustration 1 g01086114
Lower the temperature of bearing cups (5) and (8). Install bearing cups (5) and (8) to roller assembly (7).
Place bearing cone (9) in bearing cup (8).
Install lip seal (11) to roller assembly (7).
Place bearing cone (6) in roller assembly (7).
Install roller assembly (7) to shaft assembly (10).
Install retainer (4). Install locking bolts (3). Tighten locking bolts (3) to a torque of 80 15 kg (176 33 lb).
Apply Tooling (A) to the bearings. Install cover (2) and the gasket. Install bolts (1). End By:
Install the ejector support roller. Refer to Disassembly and Assembly, "Roller (Ejector Support ) - Install".