RING 4D5292 - Caterpillar

Illustration 3 g02717658
Remove support assembly (7). Disconnect hose assembly (8). Disconnect hoses (9) and (10). Remove hose (11) .
Illustration 4 g02717675
Illustration 5 g02717676
Disconnect hose assemblies (12) and (13) .
Illustration 6 g02717678
Disconnect clips (14) .
Illustration 7 g02717926
Disconnect hoses (15) .
Illustration 8 g02717939
Disconnect harness assembly (16). Position bracket assembly (17) out of the way.
Illustration 9 g02717953
Remove clip assemblies (18). Disconnect ground strap (19) from the starter. Remove cable strap (20).
Illustration 10 g02718159
Disconnect harness assembly (21). Disconnect ground strap (22). Disconnect clip (23) from ground strap (22) .
Illustration 11 g02718170
Disconnect hose assembly (24) .
Illustration 12 g02718470
Disconnect hose assemblies (25). Disconnect harness assemblies (26) and (27) .
Illustration 13 g02718179
Bottom view of bell housing.
Remove clip (28) .
Illustration 14 g02718760
Disconnect cable strap (29). Disconnect harness assembly (30) .
Illustration 15 g02718819
Illustration 16 g02718901
Fasten Tooling (A) to torque converter (33), as shown. Tooling (A) will be used to support torque converter (33), the transmission, and the output transfer gears when the engine is being removed. The weight of torque converter (24), the transmission, and the output transfer gears is approximately 816 kg (1,800 lb).
Attach Tooling (B) and a suitable lifting device to engine (33). The weight of engine (33) is approximately 862 kg (1,900 lb).
Remove bolts (34) from the bell housing.
Remove engine mounting bolts (31) and remove engine (32) .Installation Procedure
Install engine (32) in the reverse order of removal.
Install bolts (31) and tighten bolts (31) to a torque of 520 70 N m (383 52 lb ft).
Install bolts (34) and tighten bolts (34) to a torque of 70 15 N m (52 11 lb ft).