RING-RETAINING 4N7183 - Caterpillar

Illustration 1 g00998180
(1) STIC Control
(2) Armrest STIC Control (1)
The STIC Control controls the following machine functions: Steering, Direction Control and Speed Control.Speed Control
Push upshift switch (1A) in order to shift the machine into the next highest speed.Push downshift switch (1B) in order to shift the machine into the next lowest speed.
"1" indicates First Speed.
"2" indicates Second Speed.
"3" indicates Third Speed.
"4" indicates Fourth Speed.Note: The 834H machine can only be shifted into second speed or into third speed when the parking brake is engaged. This is not available on the 836H.Reference: Refer to Operation and Maintenance Manual , "Parking Brake" for instructions on driving through the parking brake in emergency situations.Direction Control
REVERSE - Move the top of the trigger switch (1C) to "R". This will enable the machine to move in the reverse direction.NEUTRAL - Move the trigger switch (1C) to "N". This will disengage the transmission.FORWARD - Move the bottom of the trigger switch (1C) to "F". This will enable the machine to move in the forward direction.The active transmission direction will be shown on the speedometer.Steering Control
Note: The steering frame lock must be in the unlocked position in order to steer the machine.Move the STIC control to the right of the center position in order to steer the machine to the right.Move the STIC control to the left of the center position in order to steer the machine to the left.Note: When you release the STIC control, the STIC control will return to the center position. However, the machine will maintain the current travel direction.STIC Control Lock
Move the lock lever (1D) all the way to the left in order to mechanically lock the STIC control. The transmission controls will be electronically locked.Move the lock lever (1D) all the way to the front in order to unlock the STIC control. The transmission controls will unlock.Armrest (2)
Push down the knob (2A) in order to move the control console forward or backward. Release the knob in order to lock the console into position.Turn the knobs (2B) counterclockwise in order to adjust the height and the angle of the armrest. Turn the knobs clockwise in order to secure the armrest in the position that is desired.