RING-SEAL 5062334 - Caterpillar

Multipurpose Bucket Function
Mechanical Control
Illustration 1 g00732833
OPEN BUCKET CLAM (1) - Move the lever to this position in order to open the bucket clam. HOLD (2) - Move the lever to this position in order to stop the movement of the bucket clam. The lever will return to the HOLD position when you release the lever from any position.
CLOSE BUCKET CLAM (3) - Move the lever to this position in order to close the bucket clam. Pilot Control
Illustration 2 g01031826
OPEN BUCKET CLAM (1) - Move the switch to this position in order to open the bucket clam. HOLD (2) - Move the switch to this position in order to stop the movement of the bucket clam. The switch will return to the HOLD position when you release the switch from any position.
CLOSE BUCKET CLAM (3) - Move the switch to this position in order to close the bucket clam. Auxiliary Functions
Mechanical Control
Illustration 3 g00732833
The multipurpose lever controls the function of a work tool (a broom for example).ON (1) - Move the lever to this position in order to pressurize the hydraulic line on the right side of the machine.OFF (2) - Move the lever to this position in order to turn off the hydraulic lines.ON (3) - Move the lever to this position in order to pressurize the hydraulic line on the left side of the machine.Pilot Control
Illustration 4 g01031826
The multipurpose switch controls the function of a work tool.ON (1) - Move the switch to this position in order to pressurize the hydraulic line on the right side of the machine.OFF (2) - Move the switch to this position in order to turn off the hydraulic lines.ON (3) - Move the switch to this position in order to pressurize the hydraulic line on the left side of the machine.Multipurpose Button (4) - Press the button in order to activate an electrical connection on the front of the machine.Multipurpose Button (5) - Press the button in order to activate an electrical connection on the front of the machine.Note: The operation of the controls will vary depending on the work tool. While you operate the machine and the work tool slowly in an open area, check the operation of all controls for the work tool.