RING 5P2499 - Caterpillar

5P2499 RING Caterpillar parts 594H, D8K, D9H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5P2499
5P-2499
5P2499

Weight: 0.010 pounds 0 kg.

Information:

CROSS SECTION DIAMETER 9.47 mm

ID 127.74 mm

MATERIAL Silicone (VMQ) Rubber - 70 Duro

OD 0 mm

Buy RING 5P2499 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK-TYPE TRACTOR,

Compatible equipment models: 5P2499:

PIPELAYER 594H

TRACK-TYPE TRACTOR D8K D9H Caterpillar

Number on catalog scheme: None

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 456-7982 Tool - Remove / Install (Camshaft Bushing) 1 Start By:
Remove the camshaft.
Remove the flywheel housing.Note: Note the oil hole orientation in each camshaft bearing prior to removal for assembly purposes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03851497
Use Tooling (A) to remove camshaft bearings (1) from the cylinder block.Installation Procedure
Install camshaft bearings (1) in the reverse order of removal.
Orient camshaft bearings (1) so that the oil holes are located as noted in removal procedure.