RING-RETAINING 6L9724 - Caterpillar

Diagnostic tools are needed in order to troubleshoot the following components: thermocouples, transducers, contactors and the engine speed switch. The tooling should be capable of simulating the sensors and reading the sensors. The tooling is needed for servicing of the engine speed switch. Multimeters aid in the isolation of open circuits and the isolation of short circuits.Recommended
The following equipment is recommended:
The Fluke 741B ("Process Calibration") is desired. 163-0096 Diagnostic and Calibration Tool
The 4C-4029 Adjusting Tool
The Fluke 87 9U-7330 Digital Multimeter
The Caterpillar Multimeter is also acceptable. 6V-7070 Digital Multimeter
Power SupplyThe attachments for the Fluke multimeter are in the following list:
6V-9129 Adapter
4C-6095 Plug
6V-9131 Thermocouple Probe (K Type)
7X-7481 Wire (K Type)
Thermocouple Module 80TK is for reading thermocouples.
Immersion Probe 80PK2A can be used with self-sealing adapters.General Diagnostic Tools For the 3600
Reference Engine News October 1990, "Engine Commissioning and Diagnostic Tooling Kit".The following tools are used for measuring the pressures of the engine. The tools are also use for measuring the temperatures of the engine.
1U-5470 Engine Pressure Group
6V-9130 Temperature Adapter
1U-8865 Infrared Thermometer
139-2788 Crimping Tool The following list contains the self-sealing adapters that are used for the installation of test ports in piping systems. The sizes of the adapters and the quantities of the adapters depend on the number of test ports that are needed.
5P-2725 Probe Seal Adapter
5P-3591 Probe Adapter
4C-4545 Probe Adapter Group A Carrier-Oehler Calibration Pump is used in order to calibrate the setup for the alarms. The pump is also used in order to calibrate the shutdown setup.Contact information for the calibration pump:Carrier-Oehler Company
P.O. Box 40
16965 S. Vincennes
South Holland, Illinois USA 60473
ph: (708) 339-8200, fax: (708) 339-9830