6P8309 RING-RETAINING Caterpillar parts
D10, D11N, D11R, D11T
Rating:
Alternative (cross code) number:
CA6P8309
6P-8309
6P8309
CA6P8309
6P-8309
6P8309
Weight: 0.30 pounds 0 kg.
Information:
OD
255.73
mm
THICKNESS
2.18
mm
TYPE
SPIRAL
TRACK-TYPE TRACTOR,
Number on catalog scheme:
121
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01209599
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g01209603
Disconnect hose assemblies (1), (2), (5), and (6). Remove bolts (3) and remove control valve (4).
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01209599
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g01209603
Disconnect hose assemblies (1), (2), (5), and (6). Remove bolts (3) and remove control valve (4).
Cat SIS web machinery list:
Parts ring Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 135H, 135H NA, D10R, D10T, D10T2, D11N, D11R, D250D, D250E, D250E II, D300E, D300E II, D400E II
793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, D10, D10N, D10R, D11N, D11R, D11T
518, 518C, 844, 844H, 844K, 854G, 854K, D10N, D11N, D11R, D11T, D4HTSK II, D4HTSK III, D5HTSK II, D8R, D8R II, D8T, D9N, D9R, D9T
120G, D10, D11N, D11R, D11T
D10, D10N, D10R
D10, D11N, D11R, D11T
D11N, D11R
D11N, D11R, D11T
D11N, D11R, D11T
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
345C, 345C L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, D10, D9G, D9H
3S8073
RING-RETAINING
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
6P8315
RING-SNAP
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
5P5580
RING-RETAINING
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
120G, D10, D11N, D11R, D11T
D8N, D8R, D8R II, D8T
D8L, D9N, D9R, D9T
D10, D10N, D10R
9W6854
RING-RETAINING
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
6T6566
RING-RETAINING
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
1153437
RING-TORIC
330C, 330C L, D11R
330C, 330C L, D11R