RING-RETAINING 6V6767 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Description     Qty    
ZZ     6V-9507     Face Seal Plug     2    
6V-9828 Cap As     2    
6V-9508 Face Seal Plug     1    
6V-9829 Cap As     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Illustration 1 g01145285
Remove bolts (1). Remove guard (2) .
Illustration 2 g01145288
Disconnect hose assemblies (3), (4), and (7). Remove bolts (6). Remove selector and pressure control valve (5) .Installation Procedure
Illustration 3 g01145288
Install selector and pressure control valve (5) into position. Secure selector and pressure control valve (5) with bolts (6). Install hose assemblies (3), (4), and (7) .
Illustration 4 g01145285
Install guard (2) into position.
Secure guard (2) with bolts (1) .