RING-SNAP 8I4535 - Caterpillar

Illustration 1 g00107449
The machine control pattern can be varied by changing the hydraulic hose connections. Consult your Caterpillar dealer for the procedure.
Illustration 2 g00101278
The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick. Note: Right Joystick positions (6) and (8) are not used in Material Handler applications.
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Boom Raise (7) - Move the joystick to this position in order to raise the boom. HOLD (9) - When you release the joystick from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally. Left Implement Joystick
Illustration 3 g01263912
Left Joystick for the 325D MH and 330D MH
Illustration 4 g01151398
Left Joystick for the 345C MH
Magnet OFF (Drop) (10) - Press the switch on the front of the left joystick in order to turn off the magnet.
Horn (11) - Press the lower switch on the top of the left joystick in order to activate the horn. Right Implement Joystick
Illustration 5 g01263916
Right Joystick for the 325D MH and 330D MH
Illustration 6 g01151475
Right Joystick for the 345C MH.
Magnet ON (Lift) (12) - Press the switch on the front of the right joystick in order to turn on the magnet.