RING-SEAL 8S3371 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01691073
Loosen clamp (3). Remove boot (2).
Loosen clamp (4). Remove breather (1).
Illustration 2 g01691075
Remove O-ring seal (5) from adapter (6).
Turn the breathers upside-down in order to inspect the condition of the breather elements. Clean the breather elements with clean, nonflammable solvent. If the breather elements remain contaminated after the cleaning, discard the breathers and obtain new breathers. Do not attempt to disassemble the breathers.Allow the breather elements to dry before installation.
Repeat this process on the opposite side. Removal Procedure for TPC00140, ; TPC01002-01004, ; TPC01100-up, and ; GLF01100-up
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g01351463
Loosen hose clamps (2) an