9H2512 RING Caterpillar parts
D320A
Rating:
Alternative (cross code) number:
CA9H2512
9H-2512
9H2512
CA9H2512
9H-2512
9H2512
Weight: 0.01 pounds 0 kg.
INDUSTRIAL ENGINE,
Compatible equipment models: 9H2512:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9508 Face Seal Plug (11/16 - 16 THD) 10
6V-9829 Cap As (11/16 - 16 THD) 10
6V-9509 Face Seal Plug (13/16 - 16 THD) 1
6V-9830 Cap As (13/16 - 16 THD) 1
6V-9511 Face Seal Plug (1 3/16 - 12 THD) 2
6V-9832 Cap As (1 3/16 - 12 THD) 2 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the access doors on the left side of the machine.
Illustration 1 g01053325
Loosen the screws and remove eight harness assemblies (2) from control valve (3).
Disconnect 13 hose assemblies (1).
Support control valve (3). Remove bolts (4) and remove control valve (3) from the frame.
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9508 Face Seal Plug (11/16 - 16 THD) 10
6V-9829 Cap As (11/16 - 16 THD) 10
6V-9509 Face Seal Plug (13/16 - 16 THD) 1
6V-9830 Cap As (13/16 - 16 THD) 1
6V-9511 Face Seal Plug (1 3/16 - 12 THD) 2
6V-9832 Cap As (1 3/16 - 12 THD) 2 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the access doors on the left side of the machine.
Illustration 1 g01053325
Loosen the screws and remove eight harness assemblies (2) from control valve (3).
Disconnect 13 hose assemblies (1).
Support control valve (3). Remove bolts (4) and remove control valve (3) from the frame.
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 120M 2, 1290T, 12E, 12G, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2...
120G, 12E, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673, 1673B, 1673C, 225, 235, 235B, 330, 330 L, 3304, 3304B, 33...
120G, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 3, 12M 3 AWD, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 143H, 14G, 14H NA, 160G, 160H, 160H ES...
12E, 140B, 153, 163, 1673, 172, 173B, 183B, 191, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3,...
1673, 1673B, 1673C, 1674, 1676, 16G, 16H NA, 245, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 375, 375 L, 385B, 385C, 5080, 5090B, 5...
16, 1673C, 1693, 16G, 231D, 245, 245B, 245D, 3208, 3304, 3306, 3306B, 3406, 3406B, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3508C, 3512, 3512B, 3516, 3516B, 5130, 5230, 589, 594, 61...
12E, 3508, 3508B, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, 3612, 3616, 583H, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 65, 651E, 657B, 657E...
12E, 12F, 14E, 24H, 3408E, 3412E, 508, 5110B, 613B, 613C, 613C II, 631D, 631E, 631G, 633E II, 637E, 637G, 65, 651E, 657, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 785D, 789D, 79...
12E, 1673C, 561B, 943, 953, 953C, 955H, 955K, 977H, D320A, D326F, D333A, D337F, D342, D342C, D343, D353C, D375D, D379, D379A, D397D, D398, D398A, D8H, D9E, G379, G398
120B, 120M, 120M 2, 12E, 12M 2, 12M 3 AWD, 140, 140B, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 1673, 1673B, 1676, 30/30, 311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E...
525B, 533, 535B, 535C, 543, 545, 545C, 572R, 572R II, 953, 953C, 953D, 963C, 966K, 966M XE, 972M XE, 973C, D25D, D300E, D320A, D346, D350E, D400E, D40D, D44B, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D...
572G, 621E, 623E, 627E, 631E, 633E II, 637E, 651E, 657E, 814B, 815B, 826C, 834B, 836, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, 980F II, 988B, 992C, 994, CS-643, D320A, D6C, D6...
572G, 621E, 623E, 627E, 631E, 633E II, 637E, 651E, 657E, 814B, 815B, 826C, 834B, 836, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, 980F II, 988B, 992C, 994, CS-643, D320A, D6C, D6...
4L8659
RING
D320A
D320A
7H3884
RING
D342, D353C, D379, D398, G379
D342, D353C, D379, D398, G379
2L4445
RING
D379, D398
D379, D398
1M3633
RING
613C II, D320A, D5
613C II, D320A, D5
4L3538
RING
D342C
D342C
7M0885
RING GROUP (.020" O "SIZE)
955H, D320A
955H, D320A
7M0888
RING GROUP (STD)
955H, D320A
955H, D320A
8H9628
RING (OIL)
D320A
D320A
5M9196
RING (COMP.)
955H, D320A
955H, D320A
5L4724
RING
D320A
D320A
2F1578
RING
D320A
D320A