RING-PISTON INTERMEDIATE 9L6933 - Caterpillar

Engine Design
(S/N: 4ZK; 6FK)
Illustration 1 g00577193
Cylinder and valve location for the 3054 Engine
(A) Exhaust valve
(B) Inlet valve Type ... Four cylinder and four strokeCombustion system ... Direct injectionNominal Bore ... 100 mm (3.937 inch)Stroke ... 127 mm (5.00 inch)Cubic capacity ... 4 liters (243 cubic inches)Compression Ratio ... 16:1Number of cylinders ... 4Arrangement of cylinders ... in-lineFiring Order ... 1, 3, 4, 2 Valve Lash Inlet valve ... 0.20 mm (0.008 inch)Exhaust valve ... 0.45 mm (0.018 inch)When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction. ... ClockwiseWhen the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction. ... ClockwiseThe front of the engine is opposite the flywheel end of the engine. The left side of the engine and the right side of the engine are determined from the flywheel end. Number 1 cylinder is the front cylinder of the engine.
Failure to follow recommended procedures for handling or transporting engines can lead to engine damage.To avoid possible engine damage, use the following procedure.
When you are lifting or moving the engine, use the following procedures in order to prevent engine damage.
Do not tilt the engine to an