9L7868 RING Caterpillar parts
1145, 3208
Rating:
Alternative (cross code) number:
CA9L7868
9L-7868
9L7868
CA9L7868
9L-7868
9L7868
Weight: 0.33 pounds 0 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
Number on catalog scheme:
3
For full view, you need register
Information:
General Information for Installing and Removing the Covers
Install the covers if overcooling is observed while the machine is idling in ambient temperatures below −15° C (5° F).Stop the machine, and remove the covers under the following conditions:
The ambient temperature is above −15° C (5° F).
The engine temperature gauge indicates overheating.
The hydraulic oil temperature gauge indicates overheating.Note: When you install or remove the cover, be sure to observe proper safety procedures for access. Maintain three-point contact and/or use an appropriate ladder or platform.Installing the Covers for 336E and 336F Excavators
Illustration 1 g02727981
Covers shown installed on the radiator compartment door (1) 375-5686 Cover (2) 375-5687 Cover
Clean the surface of the radiator compartment door, and the side of the cover that comes in contact with the door.Note: Foreign material between the magnetic cover and the door may cause the cover to lose contact with the door and dislodge.
Clean and secure the footholds before installing the covers. Technician safety is a concern in extreme temperatures.
Install 375-5686 Cover (1) to the upper section of the door. Refer to Illustration 1.
Install 375-5687 Cover (2) to the lower section of the door. Refer to Illustration 1.Cover Storage
When the ambient temperature is above −15° C (5° F), remove the covers from the door. Roll up the covers, and store the covers in the toolbox.Note: The cover becomes stiff and hard to manipulate when the ambient temperature is below −30° C (−22° F). Avoid folding the cover at this temperature because the cover can be damaged. Warm the rolled cover to above −20° C (−4° F) before unrolling and installing the cover on the door.Machine Shipping
Remove the covers before transporting the machine. Roll up the covers, and store the covers in the toolbox.Installing the Fabricated Covers
Illustration 2 g03707408
Typical example of cover location on the radiator compartment door (1) Covers
Clean the surface of the radiator compartment door.
Clean and secure the footholds before installing the cover. Technician safety is a concern in extreme temperatures.
Install the fabricated covers in the location shown in Illustration 2. The covers should fully cover the door vents.
Install the covers if overcooling is observed while the machine is idling in ambient temperatures below −15° C (5° F).Stop the machine, and remove the covers under the following conditions:
The ambient temperature is above −15° C (5° F).
The engine temperature gauge indicates overheating.
The hydraulic oil temperature gauge indicates overheating.Note: When you install or remove the cover, be sure to observe proper safety procedures for access. Maintain three-point contact and/or use an appropriate ladder or platform.Installing the Covers for 336E and 336F Excavators
Illustration 1 g02727981
Covers shown installed on the radiator compartment door (1) 375-5686 Cover (2) 375-5687 Cover
Clean the surface of the radiator compartment door, and the side of the cover that comes in contact with the door.Note: Foreign material between the magnetic cover and the door may cause the cover to lose contact with the door and dislodge.
Clean and secure the footholds before installing the covers. Technician safety is a concern in extreme temperatures.
Install 375-5686 Cover (1) to the upper section of the door. Refer to Illustration 1.
Install 375-5687 Cover (2) to the lower section of the door. Refer to Illustration 1.Cover Storage
When the ambient temperature is above −15° C (5° F), remove the covers from the door. Roll up the covers, and store the covers in the toolbox.Note: The cover becomes stiff and hard to manipulate when the ambient temperature is below −30° C (−22° F). Avoid folding the cover at this temperature because the cover can be damaged. Warm the rolled cover to above −20° C (−4° F) before unrolling and installing the cover on the door.Machine Shipping
Remove the covers before transporting the machine. Roll up the covers, and store the covers in the toolbox.Installing the Fabricated Covers
Illustration 2 g03707408
Typical example of cover location on the radiator compartment door (1) Covers
Clean the surface of the radiator compartment door.
Clean and secure the footholds before installing the cover. Technician safety is a concern in extreme temperatures.
Install the fabricated covers in the location shown in Illustration 2. The covers should fully cover the door vents.
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
215, 225, 3204, 3208, 613B, 613C, 910, 916, 931B, 943, 953, D3, D4HTSK II, FB221, PS-500
215, 225, 3204, 3208, 613B, 613C, 910, 916, 931B, 943, 953, D3, D4HTSK II, FB221, PS-500
215, 225, 3204, 3208, 613C, 910, 916, 931B, 943, D3B, D4HTSK II, FB221, PS-500
215, 225, 3204, 3208, 613C, 910, 916, 931B, 943, D3B, D4HTSK II, FB221, PS-500
215, 3204, 3208, 613C, 916, 931B, 943, 953, D4HTSK II, FB221, PS-500
215, 225, 3204, 3208, 613C, 916, 943, D4HTSK II, FB221, PS-500
215, 225, 3204, 3208, 613C, 916, 943, D4HTSK II, FB221, PS-500
1145, 1150, 1160, 163, 215, 225, 227, 235, 245, 3145, 3208, 50, 518C, 528, 528B, 530B, 613B, 631E, 631G, 633E II, 637D, 637E, 637G, 910, 920, 930, 930R, 943, 950, 966C, 966R, 977H, 977K, 988, D3, D348...
215, 225, 3208, 943, 953, FB221, PS-500
3208
3208, 953
3208, 953
2N2145
RING-COLLAR
3160, 3208
3160, 3208
1514937
RING-RETAINING
30/30, DEUCE
30/30, DEUCE
1466824
RING-BACKUP
30/30, DEUCE
30/30, DEUCE
8D8256
RING-RETAINING
14E, 16, 30/30, 637D, 69D, 769C, 769D, 770, 771C, 771D, 772, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 776C, 776D, 777, 777D, 777F, DEUCE
14E, 16, 30/30, 637D, 69D, 769C, 769D, 770, 771C, 771D, 772, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 776C, 776D, 777, 777D, 777F, DEUCE
8Q2979
RING
30/30, 322B L, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C MH, 330D FM, 583T, 587R, 587T, 834G, 836G, 933C, 939C, 988G, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B,...
30/30, 322B L, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C MH, 330D FM, 583T, 587R, 587T, 834G, 836G, 933C, 939C, 988G, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B,...
1458613
RING-RETAINING
30/30, AP-1055B, AP-655C, AP-655D, BG-2455C, BG-2455D, BG655D, DEUCE
30/30, AP-1055B, AP-655C, AP-655D, BG-2455C, BG-2455D, BG655D, DEUCE
3406B, 3406C, 3406E, 3408, C-15, C-16, C15
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA, 3306, D5H
3176, 3176B, 3176C, 3196, 3306, 3306C, C-10, C-12, D250E
215, 3204, 320C, 320D FM, 543, 730C, 943, 953, CX31, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX31-P600, CX35, CX35-C18I, CX35-P800, D4HTSK II, HF181, HF201, HF221, HF222, IT28, IT28B, PM-201, PM-46...
12E, 16, 3304, 824, 854G, 955H, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D320A, D4D, D7F, D9R, D9T
215, 225, 3208, 943, 953, FB221, PS-500