9W3136 RING-RETAINING Caterpillar parts
24H, 24M, 69D, 735, 735B, 740, 740B, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 824C, 824...
Rating:
Alternative (cross code) number:
CA9W3136
9W-3136
9W3136
CA9W3136
9W-3136
9W3136
Weight: 0.15 pounds 0 kg.
Information:
OD
173.68
mm
THICKNESS
2.36
mm
TYPE
RECT SECT
ARTICULATED TRUCK, WHEEL LOADER,
Compatible equipment models: 9W3136:
Number on catalog scheme:
34
For full view, you need register
Information:
Electrical shock hazard. The electronic unit injector system uses 90-120 volts.
Remove the valve cover and look for broken parts. Repair any broken parts or replace any broken parts that are found. Inspect all wiring for the solenoids. Look for loose connections. Also look for frayed wires or broken wires. Ensure that the connector for the unit injector solenoid is properly connected. Perform a pull test on each of the wires.
Look for signs of fuel leakage. Investigate the source of the leaking fuel. Remedy the cause of the fuel leak.
Check the valve lash setting for the cylinder of the suspect unit injector. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
Ensure that the bolts that hold the unit injector are tightened to the proper torque. In order to check the torque, loosen the bolts that hold the unit injector. Tighten the bolts to the proper torque. Refer to either the Disassembly and Assembly Manual, "Unit Injector - Install".
Remove the suspect unit injector and check the unit injector for signs of exposure to coolant. Exposure to coolant will cause rust to form on the injector. If the unit injector shows signs of exposure to coolant, remove the injector sleeve and inspect the injector sleeve. Replace the injector sleeve if the injector sleeve is damaged. Refer to Disassembly and Assembly Manual, "Unit Injector Sleeve - Install". Check the unit injector for an excessive brown discoloration that extends beyond the injector tip. If excessive discoloration is found, check the quality of the fuel. Refer to Testing and Adjusting, "Fuel Quality - Test". Replace the seals on the injector and reinstall the injector. Refer to Disassembly and Assembly Manual, "Unit Injector - Install". Inspect the injector for deposits of soot that are above the surface of the seat of the injector. Deposits of soot indicate combustion gas leakage. The source of the leak should be found, and the source of the leak should be remedied. The injector will not need to be replaced if combustion gas leakage was the problem.
If the problem is not resolved, replace the suspect injector with a new injector. In order to verify that the new injector is working properly, perform the Cylinder Cutout Test. Use the Caterpillar Electronic Technician (ET).
Cat SIS web machinery list:
Parts ring Caterpillar catalog:
769, 772, 773, 773B, 776, 777
769, 772, 773B, 776, 777
769C, 772B, 773B, 785, D35HP, D400
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
345C, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, AD45B, CR20, P16, S25
1390, 2590, 320 L, 320B, 320C, 320N, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM,...
1390, 2590, 320 L, 320B, 320C, 320N, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM,...
350, 350 L, 365B, 375, 375 L, 5080, AD45B, CR20, P16, S25
16G, 16H, 16H NA, 24H, 24M, 515, 525
824C, 824S, 834B, 834H
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 24H
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 24H
824G II, 824H, 834G, 834H, 980C, 980F, 980F II, 980G, 980G II, 980H
797, 950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 980C, 980F, 980F II, 980G, 980G II, 980H
1364814
RING-CAM
980G
980G
824G II, 824H, 825G II, 825H, 826G II, 826H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG
5A8091
RING
920
920
0815443
RING
IT18B
IT18B
6W7301
RING-RETAINING
824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K, 980C, 980F, 980G, 980G II, 980H, 980K, 980K HLG, R170...
824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K, 980C, 980F, 980G, 980G II, 980H, 980K, 980K HLG, R170...
1100550
RING-RETAINING
825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 982M, AD40, AD45, AD45B, AE40, AE40 II
825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 982M, AD40, AD45, AD45B, AE40, AE40 II
1352037
RING-RETAINING
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972M XE, 980C, 980G, 980G II
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 966G, 966G II, 966H, 966K, 966M XE, 972G, 972G II, 972H, 972M XE, 980C, 980G, 980G II
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 836, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, 988F, 988F II, AD30, AD40, AE40, R1700G, R2900
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, AD30, R1700G
950B, 950B/950E, 950F, 950F II, 960F, 980C, 980F, 980F II, 980G, 980G II, 980H