RING 9W8054 - Caterpillar

1. Remove four bolts (1) and the washers. Remove two-piece bar (2). 2. Remove four bolts (5) and the washers. Disconnect drive shaft (3) from power take-off drive group (4). 3. Using two persons, remove power take-off drive shaft (3) at the rear of the machine. The weight of the power take-off drive shaft is 23 kg (50 lb). The following steps are for the installation of the power take-off drive shaft.4. Install the power take-off drive shaft in the reverse order of removal.5. Tighten bolts (5) to a torque of 135 15 N m (100 11 lb ft).End By:a. install power take-off groupb. install seat assembly and seat support