9X3606 RING-EXPANDER Caterpillar parts
336D L, 336D LN, 336E LN, 568 FM LL, 966H
Rating:
Alternative (cross code) number:
CA9X3606
9X-3606
9X3606
CA9X3606
9X-3606
9X3606
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 9X3606:
Number on catalog scheme:
For full view, you need register
Information:
Illustration 1 g01219608
Schematic of the Transmission Shift LeverThis diagnostic code is recorded when the Machine ECM does not receive the expected information from the control for the shift lever.Test Step 1. INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the Cat Data Link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating. Ensure that all the seals are present and in place.
Check the harness for signs of damage or abrasion.
Check the wires at the connector. Ensure that the wires are secured tightly into the connector. Take care not to pull the wire out of the connector.
Check the exposed wires at the connectors for nicks or signs of abrasion.
Check for moisture inside the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Ensure that the contacts are properly installed. The contacts should mate correctly when the two pieces of the connector are placed together. Expected Result:The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to Test Step 2.
NOT OK - The machine harness connectors are in need of repair.Repair: Repair the machine harness or replace the machine harness. STOPTest Step 2. CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness connectors from all electronic control modules that use the Cat Data Link.
At the machine harness for the shift lever, measure the resistance between frame ground and connector contacts 3 (wire 893-GN) and 4 (wire 892-BR) of the Cat Data Link circuit. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to Test Step 3.
NOT OK - The resistance is less than 5000 ohms. The machine harness has failed. Repair: There is a short between frame ground and contacts 3 (wire 893-GN) and 4 (wire 892-BR) of the Cat Data Link circuit in the machine harness. Repair the machine harness or replace the machine harness. STOPTest Step 3. CHECK FOR SHORT TO THE +BATTERY CIRCUIT
The disconnect switch remains in the OFF position.
All related electronic control modules remain disconnected from the machine harness.
At the machine harness connector for the shift lever, perform the checks that are listed here:
Measure the resistance between the connector contact 1 (wire 308-YL) and connector contact 3 (wire 893-GN).
Measure the resistance between connector contact 1 (wire 308-YL) and connector contact 4 (wire 892-BR). Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The harness circuit resistance is correct. Proceed to Test Step 4.
NOT OK - The resistance is less than 5000 ohms. The machine harness has failed. Repair: There is a short between the +battery circuit and contacts 3 (wire 893-GN) and 4 (wire 892-BR) of the Cat Data Link circuit in the machine harness. Repair the machine harness or replace the machine harness. STOPTest Step
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 33...
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C ...
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D FM, 324D FM LL, 3...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 34...
1390, 320 L, 320B, 320C, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D L, 329D LN, 330C, 330C L, 330...
322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 328D LCR, 330B, 330B L, 330D, 330D L, 330D MH, 336D L, 336D LN, 336E HVG, 345B II, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349...
2290, 2390, 2391, 320B, 320C, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 329D, 329D L, 329D LN, 3...
322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325C L, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336...
322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325C L, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336...
323D L, 323D2 L, 324D, 324D L, 324D LN, 324E LN, 325C, 325D, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330B L, 330C, 330C L, 330D L, 330D LN, 336D L, 336D LN, 336D2 L, 336E LN, 345B II, 345C, 345C L, ...
321C, 325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, ...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C FM, 330D FM, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 350, 350 ...
3704123
RING
950H, 950K, 962H, 962K, 966H, 966K, 966M, 972H, 972K, 972M
950H, 950K, 962H, 962K, 966H, 966K, 966M, 972H, 972K, 972M
3704121
RING-DAMPER
950H, 950K, 962H, 962K, 966H, 966K, 966M, 972H, 972K, 972M
950H, 950K, 962H, 962K, 966H, 966K, 966M, 972H, 972K, 972M
824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 993K, E70
3144131
RING-TORIC
994D, 994F, 994H
994D, 994F, 994H
8C9102
RING-WEAR
5110B, 5130, 5130B, 994F, 994H
5110B, 5130, 5130B, 994F, 994H
1577246
RING-BACKUP
5230, 5230B, 994F, 994H
5230, 5230B, 994F, 994H
1214188
RING-WEAR
5230, 5230B, 994F, 994H
5230, 5230B, 994F, 994H
1086216
RING-WEAR
5230, 5230B, 994F, 994H
5230, 5230B, 994F, 994H
5130, 5130B, 950H, D8L, D8N
5130, 5130B, 776C, 777D, 777F, 777G, 950H