RIPPER GP 1612418 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1 Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g02174574
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Disconnect tube assembly (3). Remove bolts (1 ) and elbow (2).
Illustration 2 g02174551
Remove bolts (4) and bolts (5). Remove manifold (6) and coupling (7).
Illustration 3 g01859093
Disconnect hose assembly (8). Remove hose assemblies (9). Remove bolts (10) and bolts (11). Remove oil filter base (12).
Illustration 4 g01859095
Use Tooling (A) to remove oil filter (14) from engine oil filter base (13). Remove bolts (12) and oil filter base (13). Installation Procedure
Note: Apply lubricant that is being sealed to all O-ring seals.
Install oil filter bases (11) and (13) in reverse order of removal.