AVSPARE.COM
parts catalog

RIPPER AR-MULTISHANK 3716998 - Caterpillar


3716998 RIPPER AR-MULTISHANK Caterpillar parts D10T
Rating:
86
Alternative (cross code) number:
CA3716998
371-6998
3716998
Caterpillar 3716998 RIPPER AR-MULTISHANK

Buy RIPPER AR-MULTISHANK 3716998 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3716998:

TRACK-TYPE TRACTOR  D10T   Caterpillar
  For full view, you need register

Information:


Illustration 1 g01257553
(1) Pilot accumulator
Illustration 2 g00524339
(A) Bladder (B) Steel chamber (C) Gas chamberThe accumulator has two functions:
Store energy.
Release the energy to the system.Pilot accumulator (1) provides oil for the following functions:
Lowering the boom and the stick in the event of loss of pilot system pressure
Lowering the boom and the stick after stopping the engine
Release of the swing brakePilot accumulator (1) stores pressurized hydraulic oil by taking advantage of the compressibility of nitrogen gas in the gas chamber. The valve disc seals the oil inlet when the diaphragm is fully extended.The pilot pump oil goes through the inlet port and into the oil chamber. Entering oil acts against the gas that is in the chamber through the bladder in order to maintain oil pressure. The nitrogen charged accumulators that were filled at the factory must be replaced if the accumulators fail.


Parts ripper Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.