RIPPER AR 4Z0626 - Caterpillar

4Z0626 RIPPER AR Caterpillar parts D11R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4Z0626
4Z-0626
4Z0626

Buy RIPPER AR 4Z0626 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4Z0626:

TRACK-TYPE TRACTOR D11R Caterpillar

Number on catalog scheme:

Caterpillar 4Z0626 Parts scheme RIPPER AR

For full view, you need register

Information:

The Electronic Control Module produces high voltage. To prevent personal injury make sure the Electronic Control Module is not powered and do not come in contact with the fuel injector solenoid terminals while the engine is running.
Valve lash is measured between the rocker arm and the bridge for the valves. All of the clearance measurements and the adjustments must be made with the engine stopped. The valves must be fully closed.If the measurement of the valve lash is in the acceptable range, no adjustments are necessary. The range is given in Table 1.
Table 1
Valve Lash Check: Engine Stopped
Valves Acceptable Valve Lash Range
Inlet 0.42 to 0.58 mm (0.017 to 0.023 inch)
Outlet 0.92 to 1.08 mm (0.036 to 0.043 inch) If the measurement is not within this range, adjustment is necessary. Refer to Testing And Adjusting, "Valve Lash and Valve Bridge Adjustment".