RIPPER GP 7T2583 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 6V5063 SEAL-O-RING
1 8T5090 PLUG-O RING
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Remove the 9S-4183 Plug shown in Image1 from the 286-7013 Lines Gp-Aux and the 296-7618 Lines Gp-Aux. Ensure the threads are clean and free from debris. Install a new 8T-5090 Plug and 6V-5063 O-Ring.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-10000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
It is strongly recommended to perform this service at the next oil change.
If travel is required on vessels with multiple affected engines installed it is recommended to perform this service on all affected engines on the same trip.
If the plug has been removed in order to use the plug port with a gear cooler no action is needed.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.