RIVET 1622480 - Caterpillar

Illustration 1 g03229359
Table 1
3612 Engine 1W-0873 Fuel Injection Lines Gp Specifications    
Item     Qty     Part     Specification Description    
(1)     1     5T-2760 Spring     Length under test force..........................
56 mm (2.20 inch)    
Test force.....................................................
159 N (35.7 lb)
Free length after test..............................
77 mm (3.03 inch)
Outside diameter...................................
24 mm (0.94 inch)
(2)     1     3P-1156 O-Ring Seal     Lubricate seal lightly with clean diesel fuel    
(3)     1     010-2461 Square Head Setscrew     Adjust bolt height to provide
550 50 kPa (80 7 psi) fuel pressure measured at the regulator with
30° C (86° F ) fuel input to the transfer pump. Engine must be at rated load and speed.    
Lubricate the threads of setscrew (3) and bore of the valve body after installation of the retainer and the seal.
(4)     4     7J-7187 Connector     Torque to
105 10 N m (77 7 lb ft)    
(5)     48