RIVET 4B4459 - Caterpillar

Illustration 1 g03511401
Table 1
Specification for 418-7978 Torque Converter Housing Gp
Item Qty Part Specification Description
1 1 4H-6112 Breather Torque to 35 3 N m (26 2 lb ft).
2 2 6V-2317 Bolt Torque to 28 7 N m (248 62 lb in).
3 1 6V-5843 Bolt Torque to 55 10 N m (41 7 lb ft).
4 1 183-3407 Plug As Torque to 18.5 1.0 N m (163.7 8.9 lb in).
5 2 5P-8347 Bolt Torque to 28 7 N m (248 62 lb in).
6 - - Immediately preceding installation of the pan gasket. Apply a continuous bead of black Loctite RTV Silicone 598 to the T - Joints before installation of the gasket for the pan of the torque converter housing. The application of sealant should cover the entire width of T - Joints.
Illustration 2 g03668528
Table 2
Item Qty Part Specification Description
7 1 363-2112 Lip Type Seal Install the sealing lip of the lip type seal dry.
Lubricate the outer diameter when pressing into the housing.
8 5 8T-5092 Bolt Torque to 100 20 N m (74 15 lb ft).
9 8 287-3144 Stud Torque to 100 20 N m (74 15 lb ft).
10 8 172-9966 Bolt Torque to 100 20 N m (74 15 lb ft).
11 7 6V-5684 Bolt Torque to 100 20 N m (74 15 lb ft).
12 5 172-9966 Bolt Use the following procedure in order to tighten the bolt:
1. Tighten bolt to 60 5 N m (44 4 lb ft).
2. Turn bolt to an additional angle of 30 3 degrees.
13 13 095-0658 Bolt Torque to 55 10 N m (41 7 lb ft).