ROCKER ARM AS 1206418 - Caterpillar

Table 1
J1 Connector (Implement ECM)
No.(1) Function Type
1 Keyswitch On Power
10 Cat Data Link + Input/Output
12 Pilot Solenoid Output
13 Battery − Ground
20 Cat Data Link − Input/Output
23 Battery − Ground
24 Position Sensor(2) Input (PWM)
28 ID Code 2 (GND)
31 Battery + Power
32 Ground Ground
33 Implement Lockout Switch (NO) Input
34 Implement Lockout Switch (NC) Input
35 Kickout Set Switch (Lift) Input
39 Battery + Power
40 Kickout Set Switch (Tilt) Input
41 Function Select Switch (NO) Input
42 Function Select Switch (NC) Input
43 Fine Modulation Switch (NO) Input
44 8V Sensor Power Power
45 8V Sensor Return
47 Battery + Power
48 Raise Solenoid Output
49 Lower Solenoid Output
50 Proportional Return Output Return
51 Rack Solenoid Output
52 Dump Solenoid Output
55 PWM Dr Return 9-12
57 Battery − Power
58 Third HE Solenoid Output
59 Third RE Solenoid Output
60 Proportional Return Output Return
61 Anti-Drift Lower Solenoid Output
62 Anti-Drift Dump Solenoid Output
63 Fine Modulation Switch (NC) Input
65 PWM Dr 9+
70 Battery − Power
(1) The connector contacts that are not listed are not used.
(2) IT62H only
Table 2
J2 Connector (Implement ECM)
No.(1) Function Type
4 Pilot Solenoid Return Output Return
10 Autodig Operator Trigger Indicator Indicator Output
11 Autodig Auto Trigger Ind Indicator Output
12 Autodig Record Mode Ind Indicator Output
13 Autodig Audible Indicator Indicator Output
19 Fuel Pressure Ind LED Indicator Output
24 Lift Lever Position Sensor Input (PWM)
25 Tilt Lever Position Sensor Input (PWM)
26 Third Lever Position Sensor Input (PWM)
28 Autodig Operating Mode Switch Step (S1) Input
29 Autodig Operating Mode Switch On (S2) Input
30 Autodig Kickout Set Switch (NO) Input
31 Autodig Kickout Set Switch (NC) Input
32 Rotary Lift Linkage Position Sensor Input (PWM)
33 Rotary Tilt Linkage Position Sensor Input (PWM)
36 Autodig Mode Switch 1 Input
37 Autodig Mode Switch 2 Input
38 Autodig Mode Switch 3 Input
39 Autodig Mode Switch 4 Input
44 Autodig Trigger Switch (NO) Input
45 Autodig Trigger Switch (NC) Input
50 Lift HE Pressure Sensor Input (PWM)
67 Machine Can Datalink Input/Output
68 Machine Can Datalink Input/Output
(1) The connector contacts that are not listed are not used.