ROCKER ARM AS 1535569 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release" for the correct procedure.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g02632737
Remove bolts (1) and covers (2).
Illustration 2 g02632837
Remove tube assemblies (3).
Illustration 3 g02632838
Disconnect hose assemblies (4) and harness assemblies (5).
Illustration 4 g02632840
Open cover assembly (6).
Illustration 5 g02632841
Disconnect hose assemblies (7) and (8).
Illustration 6 g02632936
Attach a suitable lifting device to bank valve (9). The weight of bank valve (9) is approximately 59 kg (130 lb).
Remove bolts (10) and bank valve (9).Installation Procedure
Install bank valve (9) in the reverse order of removal.