ROCKER ARM GP 2781929 - Caterpillar

Illustration 3 g01153684
Note: This option should be used sparingly. UPS View receives large quantities of data. The system automatically sends the required data to UPS View. This data will then be logged to a disk. You do not need to store all of the data all of the time.Note: The files are not deleted automatically, the files must be deleted manually as needed.Increment Log Files
This menu option will flush data to disk, close old log files, and open a new set of log files (effectively incrementing the file number).UPS Settings
The UPS settings drop-down menu has various selections:
Remote Notification Settings
Modem Configuration
Network Configuration
SNMP Configuration
Set System Name
Set System Time
Set User Defined Messages
Update Firmware
Update System Software OptionsTo access UPS settings, perform the following:
Select "UPS Settings" from the menu bar to display the selections that are listed in the "UPS Settings" menu. Refer to illustration 4.
Illustration 4 g01149356
Set System Name
Select "UPS Settings" from the main menu bar.
Illustration 5 g01149362
Select "Set System Name" from the drop-down menu.
Press "Receive" to identify your present settings.
Illustration 6 g01149368
Enter the new name.
Press "Send" to save the changes.Set System Time
This option allows the user to set the date and time to match the computer running UPS View. Reset the time and date to the local time zone.
Illustration 7 g01149373
Select "UPS Settings" from the main menu bar.
Select "Set System Time" from the drop-down menu.
Press "Receive" to identify the present settings.
Enter the new "Time".
Illustration 8 g01149382
Press "send" to save the changes.User Defined Messages
There are contacts on the UPS that can be used to detect an external event. When a contact assigned to this function closes, one of the user messages will be printed.
Select "UPS Settings" from the main menu bar.
Select "Set User Defined Messages" from the drop-down menu.
Illustration 9 g01149421
Press "Receive" to identify the received messages
Enter the new messages.
Press "Send" to save the changes.
Illustration 10 g01149428
Operating Parameters
UPS View allows changing operating parameters when in communication with the UPS system.Note: Refer to the appropriate UPS service manual for detailed operating parameter information.Note: The menu displayed is dependent on the product and password level.The following is an example of the variables available within the "Operating Parameters" section.
Select "Op. Params" from the main menu bar.
Select an "Op. Group" from the drop-down menu.
Illustration 11 g01149441
Telemetry Menu
This menu displays one group of the telemetry information, two telemetry sort options and one display telemetry number. Each telemetry group contains a list of all the telemetry channels contained within a group. Telemetry information varies with each UPS product.
Select "Telemetry" from the main menu bar.
Select a "Telemetry Group" from the drop-down menu.
Illustration 12 g01149456