3229168 ROCKER ARM AS Caterpillar parts
735B, 740B, 773G, 773G OEM, 775G, 775G OEM, 777G, 824K, 825K, 826K, 834K, 836K, 854K, 988K, 992K, 993K, C15, C18, C27, C32, D10T2, D11T, D8T, D9T, TH35-C15T
Rating:
Alternative (cross code) number:
CA3229168
322-9168
3229168
CA3229168
322-9168
3229168
Weight: 4 pounds 2 kg.
ARTICULATED TRUCK, WHEEL LOADER,
Related part:
3229168
ARM AS-UI ROCKER
20R3323
R
Compatible equipment models: 3229168:
Number on catalog scheme:
3
For full view, you need register
Information:
3176 Truck EnginesThe electronically controlled 3176 Engine makes extensive use of aluminum as a means of saving weight. Correct grounding procedures MUST be utilized. Incorrect grounding may result in an electrical component malfunction or galvanic corrosion of the aluminum components.
Single point grounding for engine and vehicle electrical systems is necessary for satisfactory performance and reliability. All electrical sensors and switches on the engine MUST be an externally grounded, two wire design. Internally grounded or case grounded sensors or switches MUST NOT be used. Illustrations 1 and 2 show single point grounds for the engine, starter-to-battery negative and chassis/vehicle frame ground.
The following components are part of the ground system on the 3176 Engine.
Illustration 1. Cylinder head-to-battery (-) ground path. CYLINDER HEAD GROUND STUD: This is provided as a central grounding point for all components on the 3176 Engine. An M8X1.25-6g thread stud with washers and nut is supplied with the engine. All engine related ground wires from OEM's (original equipment manufacturers) should be attached to this stud. Follow the same procedure for early 3176 Engines that may have a fastener in this location rather than the stud. See Illustration 3.
ALTERNATOR GROUND WIRE: This is installed by Caterpillar® to the cylinder head ground stud. The OEM should attach the free end to the alternator. This ground cable is AWG No. 2 cable and is routed to the alternator through the harness clip located on the front lifting eye. A continuity lamp (or ohmmeter) can confirm if the alternator is connected by the wire to the ground stud.
PATH TO BATTERY: Illustrations 1 and 2 show the recommended paths to the battery ground. An AWG No. 0 cable (or larger cable that is capable of carrying any possible current) must provide a ground path from the cylinder head stud location to the negative post on the battery.
Illustration 2. Alternate cylinder head-to-battery (-) ground path.
Illustration 3. Cylinder head ground stud detail.
Single point grounding for engine and vehicle electrical systems is necessary for satisfactory performance and reliability. All electrical sensors and switches on the engine MUST be an externally grounded, two wire design. Internally grounded or case grounded sensors or switches MUST NOT be used. Illustrations 1 and 2 show single point grounds for the engine, starter-to-battery negative and chassis/vehicle frame ground.
The following components are part of the ground system on the 3176 Engine.
Illustration 1. Cylinder head-to-battery (-) ground path. CYLINDER HEAD GROUND STUD: This is provided as a central grounding point for all components on the 3176 Engine. An M8X1.25-6g thread stud with washers and nut is supplied with the engine. All engine related ground wires from OEM's (original equipment manufacturers) should be attached to this stud. Follow the same procedure for early 3176 Engines that may have a fastener in this location rather than the stud. See Illustration 3.
ALTERNATOR GROUND WIRE: This is installed by Caterpillar® to the cylinder head ground stud. The OEM should attach the free end to the alternator. This ground cable is AWG No. 2 cable and is routed to the alternator through the harness clip located on the front lifting eye. A continuity lamp (or ohmmeter) can confirm if the alternator is connected by the wire to the ground stud.
PATH TO BATTERY: Illustrations 1 and 2 show the recommended paths to the battery ground. An AWG No. 0 cable (or larger cable that is capable of carrying any possible current) must provide a ground path from the cylinder head stud location to the negative post on the battery.
Illustration 2. Alternate cylinder head-to-battery (-) ground path.
Illustration 3. Cylinder head ground stud detail.
Cat SIS web machinery list:
Parts rocker Caterpillar catalog:
3841365
ROCKER ARM GP
773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G OEM, 777C, 777D, 777F, 777G, 844H, 844K, 854K, 990H, 990K, 992K, 993K, AD55B, AD60, C27, C32, D10N, D10R, D10T, D10T2, D11R, D11T
773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G OEM, 777C, 777D, 777F, 777G, 844H, 844K, 854K, 990H, 990K, 992K, 993K, AD55B, AD60, C27, C32, D10N, D10R, D10T, D10T2, D11R, D11T
4373873
ROCKER ARM GP
24M, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 834H, 988H, 988K, C15, C18
24M, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 834H, 988H, 988K, C15, C18
4374420
ROCKER ARM GP
773G, 773G OEM, 775G, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C27, C32, D10T2, D11T
773G, 773G OEM, 775G, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C27, C32, D10T2, D11T
4373878
ROCKER ARM GP
770G, 770G OEM, 772G, 772G OEM, 773G, 773G OEM, 775G, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C15, C18, C27, C32, D10T2, D11T
770G, 770G OEM, 772G, 772G OEM, 773G, 773G OEM, 775G, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C15, C18, C27, C32, D10T2, D11T
374F L, 390F L, 735, 740, 770, 772, 773F, 777F, 844H, 990H, C15, C27, C32, D10T, D11R, D8T, TH35-C15T, TH48-E70
24M, 735, 740, 770, 772, 773F, 775F, 777F, 834H, 834K, 844H, 988H, 990H, 992K, 993K, C15, C18, C27, C32, CX31-C15I, CX31-C18I, CX35-C18I, D10T, D11R, TH35-C15I, TH35-C15T, TH48-E70
24M, 735, 735B, 740, 740B, 770, 770G, 772, 772G, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G OEM, 777C, 777D, 777F, 777G, 824K, 825K, 826K, 834H, 834K, 836K, 844H, 854K, 988H, 988K, 990H, 992K, 9...
773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G OEM, 777C, 777D, 777F, 777G, 844H, 844K, 854K, 990H, 990K, 992K, 993K, AD55B, AD60, C27, C32, D10N, D10R, D10T, D10T2, D11R, D11T
773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777C, 777F, 777G, 844K, 854K, 990K, 992K, 993K, AD55B, AD60, C27, C32, D10R, D10T2
374F L, 390F L, C15, CX31-C18I, CX35-C18I, D8T, TH35-C15T
24M, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 834H, 988H, 988K, C15, C18
770G, 770G OEM, 772G, 772G OEM, 773G, 773G OEM, 775G, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, C15, C18, C27, C32, D10T2
374F L, 390F L, C15, CX31-C18I, CX35-C18I, D8T, TH35-C15T
9Y4755
ROCKER ARM AS
3606, 3608
3606, 3608
9Y4754
ROCKER ARM AS
3606, 3608
3606, 3608
2018301
ROCKER ARM AS
G3512E, G3516C, G3516E, G3520C, G3520E, PMG3516
G3512E, G3516C, G3516E, G3520C, G3520E, PMG3516
4441801
ROCKER ARM AS
349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 623H, 627H, 980K, 980K HLG, 980M, 982M, C13, C13 XQ350
349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 623H, 627H, 980K, 980K HLG, 980M, 982M, C13, C13 XQ350
14M, 16M, 345C, 345C MH, 345D, 345D L, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H, 980C, 980K, 980K H...
3225763
ROCKER ARM AS
349E, 349E L, 349E L HVG, 349E L VG, 621H, 621K, 623H, 623K, 627H, 627K, 730C, 980K, 980K HLG, 980M, C13, C13 XQ350
349E, 349E L, 349E L HVG, 349E L VG, 621H, 621K, 623H, 623K, 627H, 627K, 730C, 980K, 980K HLG, 980M, C13, C13 XQ350
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
4162489
ROCKER ARM AS
G3516H
G3516H
4162490
ROCKER ARM AS
G3516H
G3516H