ROCKER ARM GP 4373881 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Shut OFF the fuel supply to the engine.
Drain the fuel filter housing into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace".
Illustration 1 g01373948
Disconnect sensor (4) and sensor (5).
Disconnect hose assembly (3).
Disconnect tube assembly (6) and tube assembly (7).
Attach a suitable lifting device onto fuel filter housings (2). The weight of fuel filter housings (2) is approximately 30 kg (66 lb). Remove bolts (1).
Remove fuel filter housings (2).