ROD A 0027941 - Caterpillar

Procedure for Sealing the Cab and Installing New Windows
Table 1
Required Parts    
Part Number    Description    Qty    
121-3911     Adhesive     4    
175-2934     Activator     4    
175-2935 (1)     Polyurethane Sealant     2    
274-3288     Window     1    
274-3289     Window     1    
9U-6917     Cleaner     1    
( 1 ) In EAME use 187-4857 Urethane Sealant .
Remove the old sliding windows. Make sure that all of the adhesive has been removed from the window frame.
Follow the directions of the referred Special Instruction in order to install the new 274-3288 Window and the new 274-3289 Window with 9U-6917 Cleaner, 175-2934 Activator, and 121-3911 Adhesive .
Illustration 1 g02020736
Back right side of the cab
Illustration 2 g02020737
Back left side of the cab
Inspect the locations of the cab that are shown in Illustrations 1 and 2. Apply 121-3911 Adhesive to these locations, as required.
Illustration 3 g02020755
Front window
Illustration 4 g02020756
Rear window
Clean the dust and the oxide from between the front glass and the window frame and/or the rear glass and the window frame with 9U-6917 Cleaner. Then fill all gaps around the windows with 175-2935 Polyurethane Sealant or 187-4857 Urethane Sealant .
Illustration 5 g02020774
Inside front window
Remove the putty from the inside of the front window, clean the sheet metal with 9U-6917 Cleaner. Apply 175-2935 Polyurethane Sealant or 187-4857 Urethane Sealant to the front window.