ROD F & R 0876399 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5474 Lifting Eye Assembly 2 Start By:
Remove the apron.
Illustration 1 g03701037
Raise hopper (1).
Install suitable cribbing under hopper (1) as shown in Illustration 1.
Lower hopper (1) onto the suitable cribbing.
Illustration 2 g03701043
Remove bolt (2) (not shown) and the pin assembly that secures the hydraulic cylinder to hopper (1).
Illustration 3 g06260580
Attach Tooling (A) and a suitable lifting device to hopper (1). The weight of hopper (1) is approximately 700 kg (1543 lb).
Illustration 4 g06260583
Remove bolt (4), rod (3), and the washers.
Remove hopper (1).
Repeat Step 1 through Step 7 for the hopper on the opposite side.Installation Procedure
Install hopper (1) in the reverse order of removal.