1011652 ROD-CONTROL Caterpillar parts
3176B, 3176C, 3196, 3408, C-12, C12, PR-450, PR-450C
Rating:
Alternative (cross code) number:
CA1011652
101-1652
1011652
CA1011652
101-1652
1011652
Weight: 0.80 pounds 0 kg.
Information:
LENGTH TO EYE CENTERLINE
380
mm
RING ID
12.7
mm
RING OD
0
mm
SHOULDER DIAMETER
0
mm
THREAD LENGTH
280
WIDTH
14.3
THREAD SIZE
.50-20
COLD PLANER, TRUCK ENGINE,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Zohisin 2 Sets Seat Hinge Set Male Female Replacement 1011652 or 1012412 Stainless Steel Seat Hinge Set for Car DS 1979-Up Gas Electric Car
Zohisin Reference Number - The seat hinge kit Replaces OEM number 1011652/1012412 to ensure no matching issues. This part is fully compliant with the original factory specifications, providing you with the replacement solution || Compatibility - The seat hinge kit Manufactured to original factory standards to fit all Car DS petrol and electric vehicle from 1979 and onwards. A fit for both older and newer vehicles, ensuring your vehicle stays in top condition || Quality Material - This seat hinge kit is made of high-quality stainless steel material with excellent erosion resistant and durability. Even under harsh environmental conditions, these hinge plates can be used for a long time and are not easy to or damage, saving you the cost of maintenance and replacement || Easy Installation - This seat hinge kit is very easy to install, no complicated tools or skills are required. A detailed installation guide is included so that even users can easily complete the replacement. This design not only saves time and cost, but also reduces potential problems during installation || Components Included - This seat hinge kit contains 2 sets of hinge plates, each with 2 pieces for a total of 4 pieces. These hinge plates replace the original parts of the car body and seat bottom, ensuring structural integrity and stability
Zohisin Reference Number - The seat hinge kit Replaces OEM number 1011652/1012412 to ensure no matching issues. This part is fully compliant with the original factory specifications, providing you with the replacement solution || Compatibility - The seat hinge kit Manufactured to original factory standards to fit all Car DS petrol and electric vehicle from 1979 and onwards. A fit for both older and newer vehicles, ensuring your vehicle stays in top condition || Quality Material - This seat hinge kit is made of high-quality stainless steel material with excellent erosion resistant and durability. Even under harsh environmental conditions, these hinge plates can be used for a long time and are not easy to or damage, saving you the cost of maintenance and replacement || Easy Installation - This seat hinge kit is very easy to install, no complicated tools or skills are required. A detailed installation guide is included so that even users can easily complete the replacement. This design not only saves time and cost, but also reduces potential problems during installation || Components Included - This seat hinge kit contains 2 sets of hinge plates, each with 2 pieces for a total of 4 pieces. These hinge plates replace the original parts of the car body and seat bottom, ensuring structural integrity and stability
Rollers, Bearings, Belts and Much More - Bottom for Seat Hinge Plate Set Fits for Club Car DS 1979-UP 1011652 1012412 - BND3PB-15053
Generic Rollers, Bearings, belts and much more - Bottom For Seat Hinge Plate Set Fits For Club Car DS 1979-UP 1011652 1012412 - BND3PB-15053
Generic Rollers, Bearings, belts and much more - Bottom For Seat Hinge Plate Set Fits For Club Car DS 1979-UP 1011652 1012412 - BND3PB-15053
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 1011652:
Information:
Removal Procedure
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Disconnect the batteries.
Remove the belt guard.
Illustration 1 g01138494
Put an index mark on all of the harness assemblies that are connected to alternator (1).
Disconnect the harness assemblies from the alternator.
Loosen adjusting nuts (2).
Remove belt (7).
Remove bolt (3). Remove bolt (5) and remove the alternator.
If necessary, remove nut (4) and remove the alternator pulley from the alternator.
Remove bolts (6) and remove the alternator support.
Remove bolts (8). Remove pulley (9) from the accessory drive.
Remove lip seal (10) and sleeve (11) from pulley (9). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01138494
Use Tooling (A) to install sleeve (11) on pulley (9).
Use Tooling (A) to install lip seal (10). Apply clean engine oil to the lip seal. Position the pulley on the accessory drive and install bolts (8).
Position the alternator support and install bolts (6).
Install the pulley on alternator (1). Install nut (4) and tighten to a torque of 110 10 N m (81 7 lb ft).
Position alternator (1) and install bolt (5) and bolt (3). Do not tighten the bolts.
Install belt (7).
Adjust the belt tension and tighten adjusting nuts (2) on the adjusting rod. Refer to Operation and Maintenance Manual, "Belt Tension Chart".
Tighten bolt (3) and bolt (5).
Connect the harness assemblies on alternator (1). Tighten the nuts. Refer to Specifications, "Alternator and Regulator" for the torque values.
Install the belt guard.
Connect the batteries.
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Disconnect the batteries.
Remove the belt guard.
Illustration 1 g01138494
Put an index mark on all of the harness assemblies that are connected to alternator (1).
Disconnect the harness assemblies from the alternator.
Loosen adjusting nuts (2).
Remove belt (7).
Remove bolt (3). Remove bolt (5) and remove the alternator.
If necessary, remove nut (4) and remove the alternator pulley from the alternator.
Remove bolts (6) and remove the alternator support.
Remove bolts (8). Remove pulley (9) from the accessory drive.
Remove lip seal (10) and sleeve (11) from pulley (9). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01138494
Use Tooling (A) to install sleeve (11) on pulley (9).
Use Tooling (A) to install lip seal (10). Apply clean engine oil to the lip seal. Position the pulley on the accessory drive and install bolts (8).
Position the alternator support and install bolts (6).
Install the pulley on alternator (1). Install nut (4) and tighten to a torque of 110 10 N m (81 7 lb ft).
Position alternator (1) and install bolt (5) and bolt (3). Do not tighten the bolts.
Install belt (7).
Adjust the belt tension and tighten adjusting nuts (2) on the adjusting rod. Refer to Operation and Maintenance Manual, "Belt Tension Chart".
Tighten bolt (3) and bolt (5).
Connect the harness assemblies on alternator (1). Tighten the nuts. Refer to Specifications, "Alternator and Regulator" for the torque values.
Install the belt guard.
Connect the batteries.
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
3126B, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C-12, C...
3114, 3116, 3126, 3126B, 3176B, 3208, 3304, 3306, 3306B, C7, D342C, D343, D346, D348, D349, D353C, D379B, D398B, D399, G3304
1140, 1673C, 1693, 3126B, 315, 315B L, 317, 3176B, 3176C, 3196, 3208, 320C, 3306, 3306C, 3406, 3406E, 3408, 3456, 571G, 572G, 572R, 611, 613B, 613C, 615, 615C, 637D, 65, 65C, 65E, 75, 75C, 75D, 75E, 7...
120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140B, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14H, 14H NA, 153, 16, 160H, 160H ES, 160H N...
3408, 3412, 637D, 988B
245, 245B, 245D, 24H, 3406, 3406B, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, 375, 375 L, 5080, 5110B, 5130, 5130B, 5230B, 621B, 621E, 621F, 623E, 623...
3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 589, 631E, 637D, 637E, 651E, 657E, 772B, 775B, 836, 988B, 992C, AD40, AE40, G3408, G3408B, G3408C, G3412, G3412C, PM-565B, PR-750B
24H, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 589, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 988B, 988F,...
3116, 3126, 3126B, 3176B, 3176C, 3192, 3196, 3406, 3406E, 3412C, 3412E, 7231, 7261, 7271, C-12, C12, C18, C7, D342, D342C, D343, D353C
312B L, 3406, 3406B, 3406C, 3406E, 3408, 3456, 3516B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793B, 793C, 994, 994D, C-15, C-16, C15, C18, CX31-C15I, CX35-P800, D10...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 153, 160G, 160H, 160H ES, 160H ...
215, 3306, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3456, 533, 543, 621E, 627E, 814B, 814F, 815B, 815F, 816F, 950B, 963, 966D, 966F, 966F II, 970F, C-15, C-16, C15, CX31-C15I, D4H, D4HTSK II, R2900G, R...
3408B, 3408C, 3412, 3412C, 3412D, PM3412, SCT673, SPS342, SPT342
227, 3208, 613C, CS-551, PR-1000, PS-500
3116, 3126, 3406E, D330A
3116, 3126, 3126B, 3176B, 3176C, 3192, 3196, 3406, 3406E, 3412C, 3412E, 7231, 7261, 7271, C-12, C12, C18, C7, D342, D342C, D343, D353C
4177902
ROD AS-CONNECTING
3516, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F, C175-16, C175-20
3516, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F, C175-16, C175-20
4177903
ROD AS-CONNECTING
3516, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F, C175-16, C175-20
3516, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F, C175-16, C175-20
16G, 16H NA, 245B, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824G, 825G, 826C, 826G, 980C, 980F, 980G, CB-614, D350E, D400, D400E, D8N, D8R...
312B L, 3406, 3406B, 3406C, 3406E, 3408, 3456, 3516B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793B, 793C, 994, 994D, C-15, C-16, C15, C18, CX31-C15I, CX35-P800, D10...
3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3412, 3512, D343, D346, D348, D353C, D379, D379B, D398, G3406, G3408, G3408B, G3412, G3508, G3516
4W3616
ROD
3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, D379B
3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, D379B
3444705
ROD
3508, 3508B, 3512B, 3516B, G3516
3508, 3508B, 3512B, 3516B, G3516
1167011
ROD AS-ZINC
3508B, 3508C, 3512B, 3512C, 3516B, 3516C
3508B, 3508C, 3512B, 3512C, 3516B, 3516C