AVSPARE.COM
parts catalog

ROD AS-BRG& 1137322 - Caterpillar


1137322 ROD AS-BRG& Caterpillar parts
Rating:
51
Alternative (cross code) number:
CA1137322
113-7322
1137322
Caterpillar 1137322 ROD AS-BRG&

Buy ROD AS-BRG& 1137322 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00877568
Make sure that the thickness of plate (11) is correct before installation of the swing motor on swing drive housing (10) . Refer to Disassembly and Assembly, "Swing Drive - Assemble" for the correct installation procedure of plate (11) .
Apply Loctite 5127 to the flange surface of swing drive housing (10) before installation of the swing motor.
Illustration 2 g00873332
Use a lifting strap and a suitable lifting device to position swing motor (8) on the swing drive housing for installation. The weight of the swing motor is approximately 37 kg (80 lb).Note: Apply Loctite 243 to four bolts (9) before installation.
Install four mounting bolts (9) . Tighten the mounting bolts to a torque of 177 10 N m (131 8 lb ft).
Illustration 3 g00873182
Install hose assembly (1) . Tighten the hose assembly to a torque of 76 4 N m (56 3 lb ft).
Install hose assembly (2) . Tighten the hose assembly to a torque of 76 4 N m (56 3 lb ft).
Install hose assembly (3) . Tighten the hose assembly to a torque of 37 4 N m (27 3 lb ft).
Install hose assembly (4) . Tighten the hose assembly to a torque of 37 4 N m (27 3 lb ft).
Install hose assembly (5) . Tighten the hose assembly to a torque of 37 4 N m (27 3 lb ft).
Install hose assembly (6) . Tighten the hose assembly to a torque of 76 4 N m (56 3 lb ft).
Install hose assembly (7) . Tighten the hose assembly to a torque of 76 4 N m (56 3 lb ft).
Fill the swing drive. The capacity of the swing drive is approximately 1.5 L (0.4 US gal). Refer to Operation and Maintenance Manual, SEBU7421, "Swing Drive Oil - Change" for the correct procedure. Refer to Operation and Maintenance Manual, SEBU7421, "Refill Capacities" for the correct refill capacities.


Parts rod Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.