ROD AS 1275442 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-2352 Support Stand As 4
B 422-5472 Lifting Eye As 2
C 323-1146 Engine Lifting Device 1
Illustration 1 g03734847
Attach Tooling (B) and a suitable lifting device to engine oil pan (14). The weight of engine oil pan (14) is approximately 958 kg (2108 lb).
Lower engine oil pan (14) into position and install bolts (15).
Illustration 2 g03733938
Illustration 3 g03734261
Attach a suitable lifting device to Tooling (C). The weight of the engine is approximately 11818 kg (26054 lb)
Lower engine onto engine oil pan (14) and install bolts (12) and bolts (13) (not shown).
Illustration 4 g03734059
Remove bolts (11).
Illustration 5 g03734024
Remove Tooling (C) and install bracket (9) and bolt (10).
Illustration 6 g03733749
Install cover assembly (8) and bolts (7).
Illustration 7 g03733492
Install bracket assembly (3), cover assembly (4), cover assembly (5), and cover assembly (6).
Connect hose assembly (1) and hose assembly (2).
Fill the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and filling procedure.
Turn the fuel supply valve to the ON position.
Turn the battery disconnect switch to the ON position. End By:
Install engine oil pump.