AVSPARE.COM
parts catalog

ROD-CONTROL 1400487 - Caterpillar



1400487 ROD-CONTROL Caterpillar parts ROD
Rating:
11
Alternative (cross code) number:
CA1400487
140-0487
1400487
Caterpillar 1400487 ROD-CONTROL
Weight: 9 pounds 4 kg.

Buy ROD-CONTROL 1400487 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

No.1 Clutch:(24) Length of the 3K2510 Pin (for No.1, No.2, and No.3 clutches) ... 5.00 in.(127.0 mm)(23) 9H5536 Springs (ten) for the No.1 and No.2 clutches: Length under test force ... 4.093 in.(103.96 mm)Test force ... 31.1 2.5 lb.(14.11 1.13 kg)Free length after test ... 5.093 in.(129.36 mm)Outside diameter ... .562 in.(14.27 mm)(22) Diameter of the 5M6210 Shaft for the planet gears in No.1 and No.2 clutches 1.3880 .0003 in. (35.25 0.01 mm)(14) Height of four new 5M6122 Discs and three new 8M8651 Plates ... 1.605 to 1.647 in.(40.77 to 41.83 mm)(9) Torque for the nine bolts in the clutch housing ... 85 5 lb. ft.(11.76 0.7 mkg)(11) Torque for the bolt in the retainer on the input shaft ... 40 5 lb. ft.(5.5 0.7 mkg) No.2 Clutch:(8) Height of three new 5M6122 Discs and two new 8M8651 Plates ... 1.142 to 1.172 in.(29.01 to 29.77 mm)(10) Diameter of the 5M6211 Shaft for the planet gears in No.2 and No.3 clutches 1.3880 .0003 in. (35.25 0.01 mm) No.3 Clutch:(7) Height of two new 5M6122 Discs and one new 8M8651 Plate for No.3, No.4 and No.5 clutches ... 1.085 .015 in.(27.56 0.03 mm) No.4 Clutch:(21) Length of the 4M1641 Pin (for No.4 and No.5 clutches ... 5.00 in.(127.00 mm)(20) Diameter of the 9M1996 Shaft for the planet gears ... 1.3880 .0003 in.(35.25 0.01 mm)(6) Diameter of the 9M1500 Shaft for the planet gears in No.4 and No.5 clutches ... 1.3880 .0003 in.(35.25 0.01 mm) No.5 Clutch:(19) 4M9542 Springs (thirty) for the No.3, No.4 and No.5 clutches (each have ten springs): Length under test force ... 1.37 in.(34.8 mm)Test force ... 2.62 1.3 lb.(11.9 0.6 kg)Free length after test ... 1.76 in.(44.7 mm)Outside diameter ... .562 in.(14.27 mm) No.6 Clutch:(17) Length of the 1S9984 Pin ... 3.35 in.(85.09 mm)(18) Torque for the bolts holding the No.6 clutch housing to case ... 85 5 lb. ft.(11.76 0.69 mkg)(13) Torque for the bolts holding the oil manifold to the No.6 clutch housing ... 40 5 lb. ft.(5.53 0.69 mkg)(4) Torque for the bolts holding the cover to the No.6 clutch housing ... 85 5 lb. ft.(11.76 0.69 mkg)(5) Diameter of the 7S4669 Shaft for the planet gears ... 1.3880 .0003 in.(35.25 0.01 mm) (15) Height of four new 5M6122 Discs and three new 8M8651 Plates ... 1.605 to 1.647 in.(40.77 to 41.83 mm)(16) 7M1199 Springs (ten): Length under test force ... 2.17 in.(55.12 mm)Test force ... 28.8 2.3 lbs.(13.06 1.04 kg)Free length after test ... 2.79 in.(70.87 mm)Outside diameter ... .562 in.(14.27 mm) No.7 Clutch:(2) 4S5854 Springs (ten): Length under test force ... 1.58 in.(40.13 mm)Test force ... 74 lbs.(33.57 kg)Free length after test ... 1.83 in.(46.48 mm)Outside diameter ... .60 in.(15.24 mm)(3) Length of the 4M8871 Pin ...


Parts rod Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.