1486543 ROD AS Caterpillar parts
45, 55
Rating:
Alternative (cross code) number:
CA1486543
148-6543
1486543
CA1486543
148-6543
1486543
Weight: 44 pounds 19 kg.
CHALLENGER,
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1 Start By:
Release the pressure in the hydraulic system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01279237
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system. Remove Tooling (A) after installation.
Illustration 2 g00857074
Disconnect fittings (1) and (4) from the counterweight control valve.
Disconnect hose assemblies (2) and (3) from the counterweight control valve.
Illustration 3 g00857075
Remove the cotter pin and the washer in order to remove pin (5).
Illustration 4 g00857076
Remove bolts (6) from counterweight control valve (7). Remove counterweight control valve (7) from the machine. Installation Procedure
Install counterweight control valve (7) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1 Start By:
Release the pressure in the hydraulic system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01279237
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system. Remove Tooling (A) after installation.
Illustration 2 g00857074
Disconnect fittings (1) and (4) from the counterweight control valve.
Disconnect hose assemblies (2) and (3) from the counterweight control valve.
Illustration 3 g00857075
Remove the cotter pin and the washer in order to remove pin (5).
Illustration 4 g00857076
Remove bolts (6) from counterweight control valve (7). Remove counterweight control valve (7) from the machine. Installation Procedure
Install counterweight control valve (7) in the reverse order of removal.
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 211B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322 LN, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 325C, 35, 446B, 45, 525...
120H, 120H ES, 120H NA, 135H, 135H NA, 211B, 214B, 3114, 3116, 3126, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 5...
4H2792
ROD END
120G, 12G, 130G, 140G, 14G, 160G, 16G, 35, 45, 55, 621, 621R, 623, 627B, 814B, 815B, 816B, 824C, 826C, 966D, 980C, D342C, D343, D353C, D398
120G, 12G, 130G, 140G, 14G, 160G, 16G, 35, 45, 55, 621, 621R, 623, 627B, 814B, 815B, 816B, 824C, 826C, 966D, 980C, D342C, D343, D353C, D398
1086195
ROD AS
45, 55
45, 55
1128863
ROD
35, 45, 55
35, 45, 55
1176879
ROD-BRAKE ADJUSTMENT
35, 45, 55
35, 45, 55
1279472
ROD
45, 55, 924G, 924GZ, 924H, 924HZ
45, 55, 924G, 924GZ, 924H, 924HZ
1454702
ROD
35, 45, 55
35, 45, 55
1138658
ROD
35, 45, 55, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E
35, 45, 55, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E
1711160
ROD AS
45, 55
45, 55
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
1783893
ROD
416C, 416F, 420D, 420E, 420F, 424D, 426C, 428C, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 436C, 438C, 442D, 442E, 444E, 444F, 906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K, 924G, 924GZ, 924H, 924H...
416C, 416F, 420D, 420E, 420F, 424D, 426C, 428C, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 436C, 438C, 442D, 442E, 444E, 444F, 906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K, 924G, 924GZ, 924H, 924H...
16H, 3196, 365B, 365B II, 365B L, 730, 85D, 85E, 95E, 972G II, C-12, C12, MTC835, SBF214, SUF557
140H, 143H, 14H, 160H, 163H, 3176C, 345B, 345B II, 345B II MH, 345B L, 480, 572R II, 65E, 725, 75D, 75E, 814F, 815F, 816F, 966G II, C-10, CPT372, D7R II, R1600, R1600G, R1700G, TK1051, W345B II
6E1939
ROD AS
426B, 426C, 436C
426B, 426C, 436C
420D, 426C, 428D, 430D, 436C
6E3661
ROD AS
426B, 426C, 436C
426B, 426C, 436C
2107531
ROD END AS
65E, 75E
65E, 75E
1516273
ROD AS
65E, 75E, 85E, 95E
65E, 75E, 85E, 95E
1209134
ROD
65E, 75E, 85E, 95E
65E, 75E, 85E, 95E
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
1711160
ROD AS
45, 55
45, 55
1611884
ROD AS
35, 45, 55
35, 45, 55