1611884 ROD AS Caterpillar parts
35, 45, 55
Rating:
Alternative (cross code) number:
CA1611884
161-1884
1611884
CA1611884
161-1884
1611884
Weight: 44 pounds 19 kg.
Information:
ROD DIAMETER
63.45
mm
ROD END TYPE
BOLT
ROD EYE TYPE
2
ROD LENGTH
743.6
mm
CHALLENGER,
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1 Start By:
Release the pressure in the hydraulic system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g00849446
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system. Remove Tooling (A) after installation.
Illustration 2 g02151157
Open door (1).
Illustration 3 g00856718
Disconnect fittings (4) and (9) from solenoid valve (8).
Disconnect hose assemblies (2), (6), and (7) from solenoid valve (8).
Disconnect harness (5) from solenoid valve (8).
Remove bolts (3) from solenoid valve (8). Remove solenoid valve (8) from the machine. Installation Procedure
Install solenoid valve (8) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1 Start By:
Release the pressure in the hydraulic system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g00849446
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi). This procedure will pull a vacuum on the hydraulic system. Remove Tooling (A) after installation.
Illustration 2 g02151157
Open door (1).
Illustration 3 g00856718
Disconnect fittings (4) and (9) from solenoid valve (8).
Disconnect hose assemblies (2), (6), and (7) from solenoid valve (8).
Disconnect harness (5) from solenoid valve (8).
Remove bolts (3) from solenoid valve (8). Remove solenoid valve (8) from the machine. Installation Procedure
Install solenoid valve (8) in the reverse order of removal.
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 211B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322 LN, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 325C, 35, 446B, 45, 525...
120H, 120H ES, 120H NA, 135H, 135H NA, 211B, 214B, 3114, 3116, 3126, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 5...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
1749706
ROD-THREADED
35, 45, 55
35, 45, 55
1531989
ROD
35, 45, 55
35, 45, 55
1678004
ROD END AS
35, 45, 55
35, 45, 55
1678010
ROD END
35, 45, 55
35, 45, 55
1806758
ROD END AS
35, 45, 55
35, 45, 55
1806759
ROD END GP-HITCH
35, 45, 55
35, 45, 55
1831186
ROD
35
35
1555299
ROD
35
35
1486543
ROD AS
45, 55
45, 55
1783893
ROD
416C, 416F, 420D, 420E, 420F, 424D, 426C, 428C, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 436C, 438C, 442D, 442E, 444E, 444F, 906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K, 924G, 924GZ, 924H, 924H...
416C, 416F, 420D, 420E, 420F, 424D, 426C, 428C, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 436C, 438C, 442D, 442E, 444E, 444F, 906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K, 924G, 924GZ, 924H, 924H...
16H, 3196, 365B, 365B II, 365B L, 730, 85D, 85E, 95E, 972G II, C-12, C12, MTC835, SBF214, SUF557
140H, 143H, 14H, 160H, 163H, 3176C, 345B, 345B II, 345B II MH, 345B L, 480, 572R II, 65E, 725, 75D, 75E, 814F, 815F, 816F, 966G II, C-10, CPT372, D7R II, R1600, R1600G, R1700G, TK1051, W345B II
6E1939
ROD AS
426B, 426C, 436C
426B, 426C, 436C
420D, 426C, 428D, 430D, 436C
2107532
ROD END AS
65E, 75E
65E, 75E
2107531
ROD END AS
65E, 75E
65E, 75E
1516273
ROD AS
65E, 75E, 85E, 95E
65E, 75E, 85E, 95E
1209134
ROD
65E, 75E, 85E, 95E
65E, 75E, 85E, 95E
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
1711160
ROD AS
45, 55
45, 55