ROD-TORQUE 1630272 - Caterpillar

Illustration 1 g02575796
Table 1
Specification for 296-0945 Bucket Linkage Gp    
Item     Qty     Part     Specification Description    
1     2     8T-4244 Nut     Position the nut (1) to the distance
0.5 mm (0.02 inch) past the end of the bolt. For locking, tighten the nut (2) against the nut (1).
Torque to
70 15 N m (52 11 lb ft).    
2     2     8T-4244 Nut    
3     2     -     During assembly of the linkage group on machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick.    
4     2     8T-4244 Nut     Position the nut (5) to the distance
2.0 mm (0.08 inch) past the end of the bolt. For locking, tighten the nut (4) against the nut (5).
Torque to
70 15 N m (52 11 lb ft).    
5     2     8T-4244 Nut    
6     4     150-5689 Shim     As required, use the shim in order to adjust the lateral clearance to a maximum of
1.0 mm (0.04 inch):
Thickness is
1.0 mm (0.04 inch).    
7     1     296-9480 Pin     Diameter is
49.89 0.02 mm (1.964 0.001 inch).    
8     1     296-9479 Pin     Diameter is
54.890 0.023 mm (2.1610 0.0009 inch).    
9     4     093-0064 Shim     As required, use the shim in order to adjust the lateral clearance to a maximum of
1.0 mm (0.04 inch):
Thickness is
1.0 mm (0.04 inch).    
10     2     296-9481 Pin     Diameter is
49.89 0.02 mm (1.964 0.001 inch).    
11     4     093-1432 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss.    
12     2     218-5197 Bushing     Inside diameter before assembly is
55.200 0.025 mm (2.1732 0.0010 inch).
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).    
13     2     296-9578 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss.    
14     2     296-9438 Bushing     Inside diameter before assembly is
50.200 0.015 mm (1.9764 0.0006 inch).
Installation depth of the bushing is
9.5 0.8 mm (0.37 0.03 inch).