ROD AS 1869010 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 140-7742 Sleeve 1
Park the machine on a hard, level surface.
Illustration 1 g01722533
Remove panel (1).
Illustration 2 g01736896
Position suitable cribbing to support track assembly (2). This will keep any compression from the track adjusters.
Release the track tension. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the correct procedure.
Illustration 3 g01736933
Remove track guide guards (3).
Illustration 4 g01736973
Remove bar (4).
Illustration 5 g01736995
Illustration 6 g01737036
Attach Tooling (A) and a suitable lifting device to hydraulic track adjuster (6). The weight of hydraulic track adjuster (6) is approximately 29 kg (65 lb).
Remove two bolts (5) (not shown).
Use Tooling (A) and the suitable lifting device to lower hydraulic track adjuster (6) into position between rollers (7). Remove hydraulic track adjuster (6).Installation Procedure
Install hydraulic track adjuster (6) in the reverse order of removal.