ROD AS 2270992 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01025232
Typical example
Disconnect tube assembly (1) and tube assembly (3) from fuel filter base (2). Immediately cap all openings or plug all openings in order to prevent contamination.
Remove the bolts that attach the fuel filter base to the mounting bracket. Remove fuel filter base (2) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01025232
Typical example
Position fuel filter base (2) on the mounting bracket. Install the bolts.
Connect tube assembly (1) and tube assembly (3) to fuel filter base (2) .