2276809 ROD Caterpillar parts
307C, 307D, 311C, 312C L, 315C, 318C, 320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH
Rating:
Alternative (cross code) number:
CA2276809
227-6809
2276809
CA2276809
227-6809
2276809
Weight: 0.53 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2276809:
Number on catalog scheme:
For full view, you need register
Information:
To facilitate removal of the bucket pins without causing damage to the pins, bushings and/or O-ring seals, put the bucket flat on the floor and stick in a vertical position as shown.
1. Start the machine, and position the bucket, stick and rod links as shown. 2. Remove retaining bolt (1) and two nuts (2) from bucket pins (3). 3. Be sure the threaded puller hole in the bucket pin is clean prior to installation of tooling (A). Fasten tooling (A) to bucket pin (3) as shown. Fasten a lifting strap and a hoist to tooling (A) to support it as shown.4. Slide O-ring seals (5) off of the joints between the bucket and link assembly (4) and onto the flanges on the bucket.
When bucket pin (3) is removed, link assembly (4) will swing forward and out of the bucket. To prevent possible personal injury, do not stand in front of the link assembly (4) when bucket pin (3) is being removed.
5. Using tooling (A), remove bucket pin (3) far enough to free link assembly (4) from the bucket. Do not remove bucket pin (3) completely from the bucket. Link assembly (4) will swing forward when the bucket pin is removed. 6. Remove tooling (A) from bucket pin (3). Remove bucket pin (3) by hand. The weight of the bucket pin is 25 kg (55 lb). Remove O-ring seals (5) from the flanges on the bucket. 7. Slide O-ring seals (7) off of the joints between the stick and bucket and onto the flanges on the bucket. Remove six bolts (6) and the washers that hold plate (8) in position over the end of the bucket pin (12). Remove the plate. Remove shims (9) that are located under plate (8).8. Remove retaining bolt (10) and two nuts (11) from the bucket pin (12). 9. Be sure the threaded puller hole in the bucket pin is clean prior to installation of tooling (A). Fasten tooling (A) to bucket pin (12) as shown. Fasten a lifting strap and a hoist to tooling (A) to support it.10. Using tooling (A), remove bucket pin (12) far enough until the stick is free of the bucket. Do not remove bucket pin (12) completely out of the bucket.11. Remove tooling (A) from bucket pin (12). Remove bucket pin (12) by hand. The weight of the bucket pin (12) is 27 kg (60 lb). 12. Start the machine, and raise the stick out of the bucket. The weight of the bucket is approximately 1270 kg (2800 lb).13. Remove flange (13) from the bucket.14. Remove O-ring seals (7) from the flanges on the bucket. The following steps are for installation of the bucket.
Be sure the stick pin bore, bucket pin bores, bucket pins, and flange and O-ring seals are thoroughly clean prior to installation of the bucket.
15. Check the condition of O-ring seals (5) and (7). If the seals are worn or damaged, use new parts for replacement. 16. Put a thin coat of 5P0960 Multipurpose Grease
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
322B L, 322C, 325B L, 325C, 325C FM, 325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D FM, 385B, 385C L, 568 FM LL, M325B
322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 330B, 330B L, 345B L, M325B, W330B
322B, 322B LN, 322C, 325, 325 L, 325 LN, 325B, 325B L, 325C, 330, 330B, 330B L, 330C, 330C FM, 330C L, 385B
320C, 320C FM, 322C FM, 325C
320C, 325C
320C, 320C FM, 320C L, 321C
1290T, 1390, 2491, 2590, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 330C MH, 345B, 345C, 350, 522B, 532, 541, 541 2, 551, 552, 552 2, OEMS, TK1051, TK732, TK751, TK752
322C
320C, 323D L, 325D, 325D FM, 325D L, 329D L, 329D LN
324D, 329D LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 365B II, 38...
325C, 330C L
330C, 330C FM, 345B, 345B II, 345B II MH, 345B L
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320C, 320C FM, 320C L, 320D...
305.5, 305.5E, 306, 306E, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 350, 375, 375 L, 5080, R1300, R1300G, R1600, R1600G, R1600H, R1700G, R2900, R2900G, R3000H
1850519
ROD
306E, 307C, 307D, 311C, 312C L, 315C
306E, 307C, 307D, 311C, 312C L, 315C
7I0127
ROD
307B, 307C, 308C, 311C, 311F LRR, 312C, 312E L, 314C, 314E CR, 314E LCR, 325C, 350, 350 L, 375, 375 L
307B, 307C, 308C, 311C, 311F LRR, 312C, 312E L, 314C, 314E CR, 314E LCR, 325C, 350, 350 L, 375, 375 L
7I0125
ROD
307B, 307C, 308C, 311C, 311F LRR, 312C, 312E L, 314C, 314E CR, 314E LCR, 325C, 350, 350 L, 375, 375 L
307B, 307C, 308C, 311C, 311F LRR, 312C, 312E L, 314C, 314E CR, 314E LCR, 325C, 350, 350 L, 375, 375 L
1733349
ROD AS
312C, 312C L
312C, 312C L
1709945
ROD AS
311C, 312C, 312C L, 314C, 315C, 315D L
311C, 312C, 312C L, 314C, 315C, 315D L
311C, 312C L, 314C
1848874
ROD
311D LRR, 311F LRR, 312C, 312C L, 314C, 314D CR, 314D LCR, 320D FM RR, 320D LRR, 320D RR, 321D LCR, D6N, D6N LGP
311D LRR, 311F LRR, 312C, 312C L, 314C, 314D CR, 314D LCR, 320D FM RR, 320D LRR, 320D RR, 321D LCR, D6N, D6N LGP
1848833
ROD AS
311C, 312C, 312C L, 315C
311C, 312C, 312C L, 315C
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN