2394374 ROD Caterpillar parts
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
Rating:
Alternative (cross code) number:
CA2394374
239-4374
2394374
CA2394374
239-4374
2394374
Weight: 9 pounds 4 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
2394374 Rod (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 10.78 lbs || Dimensions: 10-10-16.72 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 10.78 lbs || Dimensions: 10-10-16.72 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
8
For full view, you need register
Compatible equipment models: 2394374:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1U-6683 Ring Expander 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear or damage. If necessary, replace any components that are worn or damaged.
Follow Steps 2.a through 2.e in order to install the piston rings to the piston.
Illustration 1 g01038129
Position the spring for oil control ring (7) into the oil ring groove in the piston. The central wire must be located inside the end of the spring.
Illustration 2 g00829406
Typical example
Use Tooling (B) to install oil control ring (7) over the spring. Note: Ensure that the central wire is 180 degrees from the ring gap.
Use Tooling (B) to install intermediate compression ring (6) into the second groove in the piston. The letter "T" and the chamfer (Y) on the inner face of the ring must be upward.
Use Tooling (B) to install top compression ring (5) into the top groove in the piston. The letter "T" must be upward.
Position the piston ring gaps at 120 degrees away from each other.
Illustration 3 g01311807
Typical example
Lubricate the bush in connecting rod (1) and lubricate the bore for the piston pin in piston (2) with clean engine oil.
Place the piston on a suitable surface with the crown downward. Install connecting rod (1) and piston pin (3) to piston (2). The name Shibaura inside the piston must align with the stamped number on the connecting rod. Ensure the correct orientation of the connecting rod in the piston. Note: If the piston pin cannot be installed by hand, heat the piston to a temperature of 45 5 °C (113 9 °F). Do not use a torch to heat the piston.
Use Tooling (A) in order to install retaining rings (4) to the piston pin bore in piston (2). Note: Ensure that the retaining rings are seated in the grooves in the piston.
Illustration 4 g01311837
Typical example
Install the upper half of connecting rod bearing (8) to connecting rod (1).
Install the lower half of connecting rod bearing (9) to connecting rod cap (10). End By:
Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1U-6683 Ring Expander 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear or damage. If necessary, replace any components that are worn or damaged.
Follow Steps 2.a through 2.e in order to install the piston rings to the piston.
Illustration 1 g01038129
Position the spring for oil control ring (7) into the oil ring groove in the piston. The central wire must be located inside the end of the spring.
Illustration 2 g00829406
Typical example
Use Tooling (B) to install oil control ring (7) over the spring. Note: Ensure that the central wire is 180 degrees from the ring gap.
Use Tooling (B) to install intermediate compression ring (6) into the second groove in the piston. The letter "T" and the chamfer (Y) on the inner face of the ring must be upward.
Use Tooling (B) to install top compression ring (5) into the top groove in the piston. The letter "T" must be upward.
Position the piston ring gaps at 120 degrees away from each other.
Illustration 3 g01311807
Typical example
Lubricate the bush in connecting rod (1) and lubricate the bore for the piston pin in piston (2) with clean engine oil.
Place the piston on a suitable surface with the crown downward. Install connecting rod (1) and piston pin (3) to piston (2). The name Shibaura inside the piston must align with the stamped number on the connecting rod. Ensure the correct orientation of the connecting rod in the piston. Note: If the piston pin cannot be installed by hand, heat the piston to a temperature of 45 5 °C (113 9 °F). Do not use a torch to heat the piston.
Use Tooling (A) in order to install retaining rings (4) to the piston pin bore in piston (2). Note: Ensure that the retaining rings are seated in the grooves in the piston.
Illustration 4 g01311837
Typical example
Install the upper half of connecting rod bearing (8) to connecting rod (1).
Install the lower half of connecting rod bearing (9) to connecting rod cap (10). End By:
Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Install".
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
120H, 120K, 120K 2, 12H, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 140M 2, 160K, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D ...
307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E ...
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C L, 385C, 385C L
2897971
ROD AS
324D, 324D FM, 324D L, 324D LN
324D, 324D FM, 324D L, 324D LN
324D, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L
324D, 329D LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 365B II, 38...
2426811
ROD AS
324D, 325C, 325D L, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
324D, 325C, 325D L, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
324D, 325D L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 340D L, 385C L
3566516
ROD AS
324E L, 324E LN
324E L, 324E LN
1858560
ROD
323D L, 323D LN, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D L, 345B II, 345B L, 345C, 345C L, 365C, 365C L
323D L, 323D LN, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D L, 345B II, 345B L, 345C, 345C L, 365C, 365C L
2914644
ROD
323D L, 323D LN, 324D LN, 325D, 325D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 345C, 345C L
323D L, 323D LN, 324D LN, 325D, 325D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 345C, 345C L
2897944
ROD AS
323D L
323D L
2897937
ROD AS
320D, 320D FM, 320D2, 320D2 L, 323D L, 323D LN
320D, 320D FM, 320D2, 320D2 L, 323D L, 323D LN
2478793
ROD AS
323D L, 323D LN, 323D SA
323D L, 323D LN, 323D SA
2478745
ROD AS
323D L, 323D LN
323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L, 324D
3509342
ROD AS
324D, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D L, 324E, 324E L, 324E LN, 326D L
2590674
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L
3509340
ROD AS
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
2590660
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L