2478887 ROD AS Caterpillar parts
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L
Rating:
Alternative (cross code) number:
CA2478887
247-8887
2478887
CA2478887
247-8887
2478887
Weight: 130 pounds 58 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 2478887 Hydraulic Cylinder Rod for Model 320D/320D FM/320D GC/320D L/320D LN/320D LRR/320D RR/320D2/320D2 GC
CTP For Model 320D/320D FM/320D GC/320D L/320D LN/320D LRR/320D RR/320D2/320D2 GC || Sold in each || Easy in-and-out fit
CTP For Model 320D/320D FM/320D GC/320D L/320D LN/320D LRR/320D RR/320D2/320D2 GC || Sold in each || Easy in-and-out fit
CTP 2478887 Hydraulic Cylinder Rod for Model 320D/320D FM/320D GC/320D L/320D LN/320D LRR/320D RR/320D2/320D2 GC
CTP For Model 320D/320D FM/320D GC/320D L/320D LN/320D LRR/320D RR/320D2/320D2 GC || Sold in each || Easy in-and-out fit
CTP For Model 320D/320D FM/320D GC/320D L/320D LN/320D LRR/320D RR/320D2/320D2 GC || Sold in each || Easy in-and-out fit
This part in 2 request:
Show.
This information for suppliers only!
2018-05-04
2018-02-06
Number on catalog scheme:
12
For full view, you need register
Compatible equipment models: 2478887:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: The removal procedure is similar for the two cylinder, the three cylinder and the four cylinder engines. The illustrations show the four cylinder engine.
Illustration 1 g01316539
Typical example
Loosen the hose clamps and disconnect the hose (not shown) from connection (2).
Illustration 2 g01316551
Typical example
Remove nuts (5) and washers (6) from valve mechanism cover (7).
Remove bolts (4) from valve mechanism cover (7). Note: Loosen the bolts evenly in order to avoid distortion of the valve mechanism cover.
Remove valve mechanism cover (7) from base (8). Remove joint (9) from valve mechanism cover (7).
If necessary, remove bolts (1) and remove connection (2) from valve mechanism cover (7). Remove gasket (2).
If necessary, remove the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install" for more information. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 266-9682 White Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The installation procedure is similar for the two cylinder, the three cylinder and the four cylinder engines. The illustrations show the four cylinder engine.
Illustration 3 g01316551
Typical example
Ensure that the valve mechanism cover is clean and free from damage. Clean the mating surface of base (8).
If necessary, install the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install" for more information.
Apply Tooling (A) to new joint (9). Install a new joint (9) to valve mechanism cover (7).
Position valve mechanism cover (7) onto housing (8) and install bolts (4) finger tight.
Install new washers (6) and nuts (5) finger tight.
For C0.5, C0.7, C1.1 and C1.6 engines, evenly tighten bolts (4) to a torque of 10 N m (89 lb in). Tighten nuts (5) to a torque of 10 N m (89 lb in). For C1.5 and C2.2 engines, evenly tighten bolts (4) to a torque of 10 N m (89 lb in). Tighten nuts (5) to a torque of 14 N m (124 lb in).
Illustration 4 g01316539
Typical example
If necessary, position a new gasket (3) onto valve mechanism cover (7) and install connection (2). Install bolts (1) and tighten to a torque of 14 N m (124 lb in).
Connect the hose (not shown) to connection (2) and tighten the hose clamps.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: The removal procedure is similar for the two cylinder, the three cylinder and the four cylinder engines. The illustrations show the four cylinder engine.
Illustration 1 g01316539
Typical example
Loosen the hose clamps and disconnect the hose (not shown) from connection (2).
Illustration 2 g01316551
Typical example
Remove nuts (5) and washers (6) from valve mechanism cover (7).
Remove bolts (4) from valve mechanism cover (7). Note: Loosen the bolts evenly in order to avoid distortion of the valve mechanism cover.
Remove valve mechanism cover (7) from base (8). Remove joint (9) from valve mechanism cover (7).
If necessary, remove bolts (1) and remove connection (2) from valve mechanism cover (7). Remove gasket (2).
If necessary, remove the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install" for more information. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 266-9682 White Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The installation procedure is similar for the two cylinder, the three cylinder and the four cylinder engines. The illustrations show the four cylinder engine.
Illustration 3 g01316551
Typical example
Ensure that the valve mechanism cover is clean and free from damage. Clean the mating surface of base (8).
If necessary, install the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install" for more information.
Apply Tooling (A) to new joint (9). Install a new joint (9) to valve mechanism cover (7).
Position valve mechanism cover (7) onto housing (8) and install bolts (4) finger tight.
Install new washers (6) and nuts (5) finger tight.
For C0.5, C0.7, C1.1 and C1.6 engines, evenly tighten bolts (4) to a torque of 10 N m (89 lb in). Tighten nuts (5) to a torque of 10 N m (89 lb in). For C1.5 and C2.2 engines, evenly tighten bolts (4) to a torque of 10 N m (89 lb in). Tighten nuts (5) to a torque of 14 N m (124 lb in).
Illustration 4 g01316539
Typical example
If necessary, position a new gasket (3) onto valve mechanism cover (7) and install connection (2). Install bolts (1) and tighten to a torque of 14 N m (124 lb in).
Connect the hose (not shown) to connection (2) and tighten the hose clamps.
Cat SIS web machinery list:
Parts rod Caterpillar catalog:
307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E ...
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 ...
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C L, 385C, 385C L
323D LN, 323D SA, 324D FM, 324D FM LL, 325D, 325D L, 329D, 329D L, 329D LN, OEMS
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
324D, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L
324D, 329D LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 365B II, 38...
324D, 325D L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 340D L, 385C L
3509340
ROD AS
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
2590660
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
1858560
ROD
323D L, 323D LN, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D L, 345B II, 345B L, 345C, 345C L, 365C, 365C L
323D L, 323D LN, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D L, 345B II, 345B L, 345C, 345C L, 365C, 365C L
2914644
ROD
323D L, 323D LN, 324D LN, 325D, 325D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 345C, 345C L
323D L, 323D LN, 324D LN, 325D, 325D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 345C, 345C L
2897944
ROD AS
323D L
323D L
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C L, 385C, 385C L
3509341
ROD AS
324D, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D L, 324E, 324E L, 324E LN, 326D L
2590672
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L, 324D
3509342
ROD AS
324D, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D L, 324E, 324E L, 324E LN, 326D L
2590674
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L