ROD AS 2488805 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00978754
Illustration 2 g00953747
Typical Example
Disconnect harness assemblies (1) from oil temperature sensors (2) .
Remove oil temperature sensors (2) from the engine. Remove the O-ring seals.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the O-ring seals. If the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 3 g00978754
Illustration 4 g00953747
Typical Example
Install the O-ring seals on oil temperature sensors (2) .
Install oil temperature sensors (2) in the engine.
Connect harness assemblies (1) to oil temperature sensors (2) .