ROD 2501165 - Caterpillar

Table 1
Sales Model Adaptable to Machines Effective in Production with Machines
795F S/N:ERM1-296 S/N:ERM297-UP
S/N:SNT1-101 S/N:SNT101-UP Rework Procedure
Use the following rework procedure in order to update the object detect mounting bracket on the above listed adaptable machines:
Table 2
Required Parts List
Item Quantity Part Number Description
1 1 383-1162 Sensor Mount As
2 6 8T-4194 Bolt
3 6 198-4778 Hard Washer
4 9 204-2281 Cable Strap
5 1 482-3265 Sensor Harness As
6 5 204-8000 Cable Tie Mounting
7 1 130-5300 Clip
8 6 8T-4182 Bolt
9 6 8T-4121 Hard Washer
Illustration 1 g03869881
Disconnect and remove 381-8275 Sensor Harness As (A). Discard the part.
Loosen bolts and remove sensors (B) from mounting bracket (C). Save all parts.
Remove bracket (D). Discard the part.
Illustration 2 g03870375
Illustration 3 g03870376
Detailed view of area E
Install 383-1162 Sensor Mount As (1) to frame group by using six bolts (2) and six hard washers (2). Refer to Illustration 3.
Illustration 4 g03870399
Install two sensors (B) to the bracket (C) using bolts removed from Step 2. Refer to Illustration 4.
Illustration 5 g03870414
Install 482-3265 Sensor Harness As (5) and connect to sensor mount assembly (1) and secure using nine cable straps (4), five cable tie mountings (6), clip (7), six bolts (8), and six hard washers (9). Refer to Illustration 5.