2624947 ROD Caterpillar parts
CS-533E, PS-360C
Rating:
Alternative (cross code) number:
CA2624947
262-4947
2624947
CA2624947
262-4947
2624947
Weight: 0.14 pounds 0 kg.
Information:
LENGTH
270
mm
THREAD LENGTH A
25
mm
THREAD LENGTH B
25
mm
THREAD SIZE A
.25-28
THREAD SIZE B
.25-28
TYPE
BOTH END
PNEUMATIC COMPACTOR, VIBRATORY COMPACTOR,
Compatible equipment models: 2624947:
Number on catalog scheme:
9
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9831 Cap As 2
6V-9510 Face Seal Plug 2
6V-9832 Cap As 5
6V-9511 Face Seal Plug 5
6V-9509 Face Seal Plug 1
6V-9830 Cap As 1
6V-9508 Face Seal Plug 1
6V-9829 Cap As 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure- Release".Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR IN THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hose assemblies for installation purposes. Plug all of the hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Clean the swing motor, and clean the area around the swing motor prior to removing the swing motor.
Illustration 1 g00828400
Disconnect hose assemblies (1) from the main control valve in order to provide access for removing the swing motor.
Illustration 2 g00828431
Disconnect hose assemblies (2), (3), (4), (5), and (6) from the swing motor.
Drain the lubricant from the swing drive into a container suitable for storage or for disposal. The capacity of the swing drive is approximately 3 L (0.8 US gal).
Illustration 3 g00828439
Attach a suitable lifting device to swing motor (7). The weight of swing motor (7) is approximately 34 kg (75 lb). Remove bolts (8) that fasten the swing motor to the swing drive. Remove swing motor (7) .
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9831 Cap As 2
6V-9510 Face Seal Plug 2
6V-9832 Cap As 5
6V-9511 Face Seal Plug 5
6V-9509 Face Seal Plug 1
6V-9830 Cap As 1
6V-9508 Face Seal Plug 1
6V-9829 Cap As 1 Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure- Release".Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR IN THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hose assemblies for installation purposes. Plug all of the hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Clean the swing motor, and clean the area around the swing motor prior to removing the swing motor.
Illustration 1 g00828400
Disconnect hose assemblies (1) from the main control valve in order to provide access for removing the swing motor.
Illustration 2 g00828431
Disconnect hose assemblies (2), (3), (4), (5), and (6) from the swing motor.
Drain the lubricant from the swing drive into a container suitable for storage or for disposal. The capacity of the swing drive is approximately 3 L (0.8 US gal).
Illustration 3 g00828439
Attach a suitable lifting device to swing motor (7). The weight of swing motor (7) is approximately 34 kg (75 lb). Remove bolts (8) that fasten the swing motor to the swing drive. Remove swing motor (7) .
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA, 3208, 3304, ...
206, 212, 214, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 320D2, 320D2 GC, 320D2 L, 414E, 416B, 416C, ...
3054, 3054B, 3054C, 3054E, 3056, 3056E, 315C, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 426C, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 436C, 438D, 442D, 442E, 444E, 450E, 550B, 554, 560B, 564, 574B, ...
3054, 3054B, 3054C, 3054E, 3056, 3056E, 315C, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 426C, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 436C, 438D, 442D, 442E, 444E, 450E, 550B, 554, 560B, 564, 574B, ...
3054, 3054B, 3054C, 3054E, 3056, 3056E, 315C, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, 450E, 914G, AP-300, AP-300D, AP-650B, AP-800D, AP555...
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, 414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 914G, AP-300, AP-65...
120G, 12E, 12G, 16, 215, 215B, 215D, 225, 225D, 229, 229D, 231D, 235, 235C, 245, 245B, 3114, 3116, 3126, 315B FM L, 3208, 320B FM LL, 322B L, 322C, 325B L, 330B L, 3406, 517, 527, 583H, 613C, 615, 615...
1244592
ROD END
902, 906, 908, 950G, 962G, 966G, 972G, 980G, CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CS-423E, CS-433E, CS-44, CS-533E, CS-54, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-68B, CS-74, CS-74B, IT6...
902, 906, 908, 950G, 962G, 966G, 972G, 980G, CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CS-423E, CS-433E, CS-44, CS-533E, CS-54, CS-56, CS-563E, CS-56B, CS-583E, CS-64, CS-68B, CS-74, CS-74B, IT6...
1317945
ROD
PF-290B, PS-150B, PS-200B, PS-360B, PS-360C
PF-290B, PS-150B, PS-200B, PS-360B, PS-360C
5E9962
ROD AS
CW-14, PF-290B, PS-150B, PS-150C, PS-200B, PS-360B, PS-360C
CW-14, PF-290B, PS-150B, PS-150C, PS-200B, PS-360B, PS-360C
2307881
ROD
AP-650B, AP-800D, CP-533E, CS-533E, PS-360C
AP-650B, AP-800D, CP-533E, CS-533E, PS-360C
CP-533E, CS-533E, CS-54
2307881
ROD
AP-650B, AP-800D, CP-533E, CS-533E, PS-360C
AP-650B, AP-800D, CP-533E, CS-533E, PS-360C
1591115
ROD
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
1591114
ROD AS
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
1592472
ROD END
M325B, RM-350B
M325B, RM-350B
1592471
ROD END
M325B, RM-350B
M325B, RM-350B
2208262
ROD
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E, BG600D, BG655D, CP-433E, CP-44, CP-54B, CP-56, CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-423E, CS-433E, CS-44, CS-54B, CS-56, CS-563E, CS...
AP-600D, AP-655D, AP1000E, AP1055E, BG1000E, BG1055E, BG600D, BG655D, CP-433E, CP-44, CP-54B, CP-56, CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-423E, CS-433E, CS-44, CS-54B, CS-56, CS-563E, CS...
2677074
ROD
CB-334E
CB-334E
2790670
ROD
CB-334E, CB-34
CB-334E, CB-34
2127810
ROD
CB-334E, CB-34
CB-334E, CB-34
2447071
ROD-SLIDE
CB-214E, CB-22
CB-214E, CB-22
2790963
ROD END-SPHERICAL
CB-214E
CB-214E
CP-533E, CS-533E, CS-54