ROD AS 3056713 - Caterpillar

Table 1
Joystick Configurations
Switch Location System Configurations
Cat Grade Control Cat Grade With Assist Cat Grade With Assist, With Tilt (If Equipped)
1 Horn Horn
2 Touch Point/Laser Constant Bucket Angle (Hold/ Store) Return to Tilt Angle and Stored Bucket Angle Button
3 Adjust Target Depth Medium Pressure Control
4 Select Cat Grade Control Select Cat Grade Control
5 (N/A) Assist Feature Setting (ON/OFF)/
Overcut Protection (Cancel)
6 Adjust Target Slope High-Pressure Control
7 Bench Mark (Set/ Clear) Constant Bucket Angle (Store/ Cancel)
8 One Touch Low Idle One Touch Low Idle Cat Grade Control System Configuration
Cat Grade Control is designed to calculate bucket tip position and provide visual and audible feedback to the operator. This feedback allows the operator to achieve the desired grade safer, quicker and more accurately than traditional grading techniques.For more information on Cat Grade Control, refer to Operation and Maintenance Manual, SEBU8358, "Cat Grade Control Depth and Slope for E Series and F Series Excavators".Horn
When horn switch (1) is depressed, the horn will sound.Touch Point/Laser
Switch (2) is used with the touch point or laser function.Adjust Target Depth
Switch (3) is used to adjust target depth.Select Cat Grade Control
Switch (4) is used to select Cat Grade Control. Press and hold this trigger to activate (2) ( 3), (6),and (7).Adjust Target Slope
Switch (6) is used to adjust target slope.Set/Clear Bench Mark
Switch (7) is used to set and clear the bench mark. Pressing the trigger will set the bench mark. Pressing and holding the trigger will clear the bench mark.One Touch Low Idle
When one-touch low idle (8) is pressed, the engine rpm is dropped. When a function is moved from the neutral position, one-touch low idle is turned off and the machine resumes the set throttle setting.Cat Grade With Assist System Configuration
Horn
When horn switch (1) is depressed, the horn will sound.Hold Store Constant Bucket Angle
Switch (2) will hold or store the constant bucket angle. Hold switches (2) and (7) for 3 seconds to set the bucket angle. Press switch (2) once to return to stored bucket angle. Press and hold switch (2) while operating the joystick for boom, stick, or bucket dump movements to hold bucket angle and keep the bucket angle. To stop holding the constant bucket angle, release switch (2) and return the joystick to neutral.Select Cat Grade Control
Switch (4) is used to select Cat Grade Control. Press and hold this trigger to activate (2), (3), (6) and (7).Refer to Cat Grade Control configuration for further details.Assist Feature Setting (ON/OFF)/ Overcut Protection Cancel
Switch (5) is used to select overcut protection or cancel. If switch (5) is held, then the bucket can go through the target slope.Store or Cancel Constant Bucket Angle
Switch (7) is used to store and cancel the bucket angle. Hold switch (7) for 3 seconds to clear stored bucket angle.One Touch Low Idle
When one-touch low idle (8) is pressed, the engine rpm is dropped. When a function is moved from the neutral position, one-touch low idle is turned off and the machine resumes the set throttle setting.Cat Grade With Assist System Configuration With Tilt