ROD-TIE 3207289 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 140-7742 Sleeve 2 Start By:
Connect the steering frame lock.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover/Charge the air conditioning system. Refer to Service Manual, SENR5664, " All Products Air Conditioning and Heating R134a for All Caterpillar Machines" for the recovery and charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g03711585
Disconnect harness assemblies (3).
Remove bolts (2) and the washers. Remove warning light assembly (1).
Cut cable strap (4) and cable straps (5).
Disconnect hose assemblies (6).
Illustration 2 g03711605
Disconnect harness assembly (3). Move harness assembly (3) out of the way.
Illustration 3 g03711657
Attach Tooling (A) and a suitable lifting device to refrigerant condenser and fans (8). The weight of refrigerant condenser and fans (8) is approximately 45 kg (100 lb).
Remove bolts (7) and the washers. Use Tooling (A) and the suitable lifting device in order to remove refrigerant condenser and fans (8). Installation Procedure
Install refrigerant condenser and fans (8) in the reverse order of removal.