3509342 ROD AS Caterpillar parts
324D, 324D L, 324E, 324E L, 324E LN, 326D L
Rating:
Alternative (cross code) number:
CA3509342
350-9342
3509342
CA3509342
350-9342
3509342
Weight: 192 pounds 87 kg.
EXCAVATOR,
Related part:
3509342
ROD AS-HYD-YM
4950126
CL
Number on catalog scheme:
11
For full view, you need register
Information:
Illustration 1 g02178613
Illustration 2 g02178614
View A-ANote: Refer to the Testing and Adjusting, "Differential and Bevel Gear - Adjust" for the adjustment procedure for the backlash between the differential ring gear (9) and the pinion assembly (10) and for preload on the carrier bearings (1) .Note: Refer to Testing and Adjusting, "Differential and Bevel Gear - Adjust" for the adjustment procedure of the thrust pin (2) .Note: As required, use the shim pack (3) between the cover (4) and the axle housing. (3) Thickness of one 9M-5874 Shim Pack ... 3.30 mm (0.130 inch) (5) Lubricate the bore of the O-ring seal with the lubricant that is being sealed.Note: The mating surfaces between the differential ring gear (9) and differential group (11) must be free of paint.Note: Before assembly of the differential group (11), assemble the differential ring gear (9) to the housing and ream one hole to the diameter 19.050 0.013 mm (0.7500 0.0005 inch). Use differential ring gear as a guide. Install one bolt (6), one washer (7) and one locknut (8) in the reamed hole. Then, ream the remaining 13 holes to 19.050 0.013 mm (0.7500 0.0005 inch) and install the remaining 13 bolts. (8) Torque for 14 locknuts ... 440 40 N m (325 30 lb ft) (12) Lubricate the sealing lip of the seal assembly lightly with the lubricant that is being sealed.Note: Refer to Testing and Adjusting, "Differential and Bevel Gear - Adjust" for the adjustment procedure for bevel pinion bearing (13) . (14) As required, use the following shims in order to preload the bevel pinion bearing: Thickness of one 330-7806 Shim ... 0.127 mm (0.0050 inch) Thickness of one 330-7805 Shim ... 0.178 mm (0.0070 inch) (15) Install the O-ring seal after adjusting the bevel pinion bearing.Note: Apply 154-9731 Thread Lock Compound to the threads of the bolts (16) . (16) Torque for 14 bolts ... 120 20 N m (88.5 14.8 lb ft)Note: Tighten four bolts (17) after adjusting the backlash between the differential ring gear (9) and the pinion assembly (10) . (17) Torque for two bolts ... 105 20 N m (77.4 14.8 lb ft) (18) Torque for two bolts ... 100 20 N m (73.8 14.8 lb ft) (19) Torque for four bolts ... 1100 150 N m (811 111 lb ft)
Caterpillar parts catalog:
Parts rod Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
120H, 120K, 120K 2, 12H, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 140M 2, 160K, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D ...
307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E ...
324D, 324D L, 324E, 324E L, 324E LN, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330D L, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D2 L, 568 FM LL
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C L, 385C, 385C L
2798109
ROD AS
324D, 324D LN, 324E LN, 325D, 325D L, 329D LN
324D, 324D LN, 324E LN, 325D, 325D L, 329D LN
324D, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L
324D, 329D LN, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 365B II, 38...
2426811
ROD AS
324D, 325C, 325D L, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
324D, 325C, 325D L, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
324D, 325D L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 340D L, 385C L
2590674
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L
3509340
ROD AS
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
2590660
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
1858560
ROD
323D L, 323D LN, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D L, 345B II, 345B L, 345C, 345C L, 365C, 365C L
323D L, 323D LN, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D L, 345B II, 345B L, 345C, 345C L, 365C, 365C L
2478825
ROD AS
324D, 324D FM, 324D L, 324D LN
324D, 324D FM, 324D L, 324D LN
323D LN, 323D SA, 324D FM, 324D FM LL, 325D, 325D L, 329D, 329D L, 329D LN, OEMS
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C L, 385C, 385C L
3509341
ROD AS
324D, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D L, 324E, 324E L, 324E LN, 326D L
2590672
ROD AS
324D, 324D L, 326D L
324D, 324D L, 326D L
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L, 324D