ROD AS-HYDRAULIC CYLINDER 3607060 - Caterpillar

Illustration 5 g01369729
Remove seal retainer (7).
Illustration 6 g01369730
Remove O-ring seal (8) and lip seal (9).
Illustration 7 g01369731
Remove shim pack (10).
Illustration 8 g01369732
Attach Tooling (C) and a suitable lifting device to transfer gear (1). The weight of transfer gear (1) is approximately 177 kg (390 lb). Use a suitable press and suitable cribbing to remove carrier assembly (11) from transfer gear (1), as shown.
Illustration 9 g01369816
Attach Tooling (A)(not shown) and a suitable lifting device to carrier assembly (11). The weight of transfer gear (1) is approximately 177 kg (390 lb). Remove carrier assembly (11) from the suitable press. Remove bolts (13) that secure manifold (12) to carrier assembly (11). Remove manifold (12).
Illustration 10 g01369762
Drive spring pin (15) toward the center of planetary carrier assembly (11). Remove planetary shaft (14).
Illustration 11 g01369837
Remove thrust discs (17) and planetary gear (16) from carrier assembly (11).
Illustration 12 g01369842
Remove bearing (18) from planetary gear (16).
Repeat Steps 10 to 12 for remaining the planetary gears.
Illustration 13 g01369763
Remove bearing cone (19).
Illustration 14 g01369765
Remove spacer (20).
Illustration 15 g01369767
Reposition the cage assembly, as shown. Remove coupling (21).
Illustration 16 g01369868
Illustration 17 g01369870
Remove ring (23) from coupling (21). Sun gear (22) and retaining ring (24) can not be separated from coupling (21) after installation.
Illustration 18 g01369778
Remove bearing cone (25).
Illustration 19 g01369815
Remove O-ring seal (26).
Illustration 20 g01369898
Remove bearing cups (27). Remove spacer (28).