ROD ASSEM. 3G5692 - Caterpillar

Illustration 1 g06152534
Main page
(1) Service Button
Press the Service button (1) located on the right side of the display.
Illustration 2 g06152538
Advisor "Service" screen
(2) UP Button
(3) OK Button
(4) Down Button
When the Service menu appears, navigate by pressing the "Up" (2) and "Down" (3) buttons located on the right side of the display. Select an item by pressing the "OK" button (4).Select “Calibrations” on the screen and press the "OK" button (4).
Illustration 3 g06152542
Advisor "Calibrations" screen
Select “Transmission” on the screen and press the "OK" button (5).
Illustration 4 g06152552
Advisor "Transmission" Calibration screen
Once the specific calibration is selected, the operator monitor will guide you through the calibration procedure.The operator monitor will list initial machine conditions that must be satisfied before the ECM will allow the calibration procedure to continue. Follow the specific instructions on the display to complete the calibration procedure.Note: The “CALIBRATION REQUIRED” diagnostic will be active and the ECM will revert to the previous successful calibrated values if a calibration is aborted at anytime. To clear the diagnostic, cycle the key.The following list details the calibrations that can be performed for the components on the Transmission ECM.
Torque Converter Pedal Calibration
Impeller Clutch Solenoid
Lockup Clutch Engagement Calibration